Hi Bin,
On 06.08.2017 02:49, Bin Meng wrote:
On Sun, Aug 6, 2017 at 12:49 AM, Stefan Roese <s...@denx.de> wrote:
This defconfig uses the PCIe x4 binary blobs from the congatec BIOS.
Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Simon Glass <s...@chromium.org>
Cc: Bin Meng <bmeng...@gmail.com>
---
v3:
- New patch
board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS | 1 +
...eadorable-x86-conga-qa3-e3845-pcie-x4_defconfig | 59 ++++++++++++++++++++++
2 files changed, 60 insertions(+)
create mode 100644 configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
diff --git a/board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS
b/board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS
index 6e065590ab..cceda4f49f 100644
--- a/board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS
+++ b/board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS
@@ -7,4 +7,5 @@ F: include/configs/theadorable-x86-conga-qa3-e3845.h
F: configs/conga-qeval20-qa3-e3845_defconfig
F: configs/conga-qeval20-qa3-e3845-internal-uart_defconfig
F: configs/theadorable-x86-conga-qa3-e3845_defconfig
+F: configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
F: arch/x86/dts/conga-qeval20-qa3-e3845.dts
diff --git a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
new file mode 100644
index 0000000000..2bfff393df
--- /dev/null
+++ b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
@@ -0,0 +1,59 @@
+CONFIG_X86=y
+CONFIG_VENDOR_CONGATEC=y
+CONFIG_TARGET_THEADORABLE_X86_CONGA_QA3_E3845=y
+CONFIG_DEFAULT_DEVICE_TREE="conga-qeval20-qa3-e3845"
+CONFIG_INTERNAL_UART=y
+CONFIG_FLASH_DESCRIPTOR_FILE="descriptor-pcie-x4.bin"
+CONFIG_SMP=y
+CONFIG_HAVE_VGA_BIOS=y
+CONFIG_VGA_BIOS_ADDR=0xfffa0000
+CONFIG_GENERATE_PIRQ_TABLE=y
+CONFIG_GENERATE_MP_TABLE=y
+CONFIG_GENERATE_ACPI_TABLE=y
+CONFIG_HAVE_ACPI_RESUME=y
+CONFIG_SEABIOS=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_BOOTSTAGE=y
+CONFIG_BOOTSTAGE_REPORT=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CPU=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_BOOTSTAGE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_ISO_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CPU=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_INTEL=y
+CONFIG_WINBOND_W83627=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_WINBOND=y
Please check http://patchwork.ozlabs.org/patch/795356/
Same as before, I'll remove Gigadevice and Macronix support
for now to have the selection consistent.
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
