Hi Stefan,

On 09.08.2017 09:37, stef...@marvell.com wrote:
From: Stefan Chulski <stef...@marvell.com>

Issues were found during internal QA phase.

Stefan Chulski (10):
   net: mvpp2x: Add GPIO configuration support
   net: mvpp2x: fix phy connected to wrong mdio issue
   net: mvpp2x: Enable GoP packet padding in TX
   net: mvpp2x: fix BM configuration overrun issue
   net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK
   net: mvpp2x: remove MBUS configurations from MvPP22 driver
   net: mvpp2x: Remove IRQ configuration from U-Boot
   net: mvpp2x: Set BM pool high address
   net: mvpp2x: remove TX drain from transmit routine
   net: mvpp2x: Set BM poll size once during priv probe

  drivers/net/mvpp2.c | 187 +++++++++++++++++++++++++---------------------------
  1 file changed, 89 insertions(+), 98 deletions(-)

All patches applied to u-boot-marvell/master.

U-Boot mailing list

Reply via email to