There are a variety of boards that need some cleanup in their respective include/configs file, but here is a foundation for them to begin their transisiton.
Signed-off-by: Adam Ford <[email protected]> --- drivers/net/Kconfig | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 5ceea44..bd2a303 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -203,6 +203,35 @@ config RTL8169 This driver supports Realtek 8169 series gigabit ethernet family of PCI/PCIe chipsets/adapters. +config SMC911X + bool "SMSC LAN911x and LAN921x controller driver" + +if SMC911X + +config SMC911X_BASE + hex "SMC911X Base Address" + default 0 + help + Define this to hold the physical address + of the device (I/O space) + +choice + prompt "SMC911X bus width" + default SMC911X_16_BIT + +config SMC911X_32_BIT + bool "Enable 32-bit interface" + +config SMC911X_16_BIT + bool "Enable 16-bit interface" + help + Define this if data bus is 16 bits. If your processor + automatically converts one 32 bit word to two 16 bit + words you may also try CONFIG_SMC911X_32_BIT. + +endchoice +endif #SMC911X + config SUN7I_GMAC bool "Enable Allwinner GMAC Ethernet support" help -- 2.7.4 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
