From: Chin Liang See <chin.liang....@intel.com>
Add SPL driver support for Stratix SoC
Signed-off-by: Chin Liang See <chin.liang....@intel.com>
---
arch/arm/mach-socfpga/Makefile | 4 +
arch/arm/mach-socfpga/include/mach/base_addr_s10.h | 4 +
arch/arm/mach-socfpga/include/mach/firewall_s10.h | 84 +++++++++++++
arch/arm/mach-socfpga/spl_s10.c | 138 +++++++++++++++++++++
4 files changed, 230 insertions(+)
create mode 100644 arch/arm/mach-socfpga/include/mach/firewall_s10.h
create mode 100644 arch/arm/mach-socfpga/spl_s10.c
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index b669d43..35b124a 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -40,6 +40,7 @@ obj-y += system_manager_s10.o
obj-y += wrap_pinmux_config_s10.o
obj-y += wrap_pll_config_s10.o
endif
+
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_TARGET_SOCFPGA_GEN5
obj-y += spl_gen5.o
@@ -51,6 +52,9 @@ endif
ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
obj-y += spl_a10.o
endif
+ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
+obj-y += spl_s10.o
+endif
endif
ifdef CONFIG_TARGET_SOCFPGA_GEN5
diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_s10.h
b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h
index feb1881..d79b9cd 100644
--- a/arch/arm/mach-socfpga/include/mach/base_addr_s10.h
+++ b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h
@@ -45,6 +45,10 @@
#define SOCFPGA_RSTMGR_ADDRESS 0xffd11000
#define SOCFPGA_SYSMGR_ADDRESS 0xffd12000
#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS 0xffd13000
+#define SOCFPGA_FIREWALL_L4_PER 0xffd21000
+#define SOCFPGA_FIREWALL_L4_SYS 0xffd21100
+#define SOCFPGA_FIREWALL_SOC2FPGA 0xffd21200
+#define SOCFPGA_FIREWALL_LWSOC2FPGA 0xffd21300
#define SOCFPGA_DMANONSECURE_ADDRESS 0xffda0000
#define SOCFPGA_DMASECURE_ADDRESS 0xffda1000
#define SOCFPGA_SPIS0_ADDRESS 0xffda2000
diff --git a/arch/arm/mach-socfpga/include/mach/firewall_s10.h
b/arch/arm/mach-socfpga/include/mach/firewall_s10.h
new file mode 100644
index 0000000..6894bb9
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/firewall_s10.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2017 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _FIREWALL_S10_
+#define _FIREWALL_S10_
+
+struct socfpga_firwall_l4_per {
+ u32 nand; /* 0x00 */
+ u32 nand_data;
+ u32 _pad_0x8;
+ u32 usb0;
+ u32 usb1; /* 0x10 */
+ u32 _pad_0x14;
+ u32 _pad_0x18;
+ u32 spim0;
+ u32 spim1; /* 0x20 */
+ u32 spis0;
+ u32 spis1;
+ u32 emac0;
+ u32 emac1; /* 0x30 */
+ u32 emac2;
+ u32 _pad_0x38;
+ u32 _pad_0x3c;
+ u32 sdmmc; /* 0x40 */
+ u32 gpio0;
+ u32 gpio1;
+ u32 _pad_0x4c;
+ u32 i2c0; /* 0x50 */
+ u32 i2c1;
+ u32 i2c2;
+ u32 i2c3;
+ u32 i2c4; /* 0x60 */
+ u32 timer0;
+ u32 timer1;
+ u32 uart0;
+ u32 uart1; /* 0x70 */
+};
+
+struct socfpga_firwall_l4_sys {
+ u32 _pad_0x00; /* 0x00 */
+ u32 _pad_0x04;
+ u32 dma_ecc;
+ u32 emac0rx_ecc;
+ u32 emac0tx_ecc; /* 0x10 */
+ u32 emac1rx_ecc;
+ u32 emac1tx_ecc;
+ u32 emac2rx_ecc;
+ u32 emac2tx_ecc; /* 0x20 */
+ u32 _pad_0x24;
+ u32 _pad_0x28;
+ u32 nand_ecc;
+ u32 nand_read_ecc; /* 0x30 */
+ u32 nand_write_ecc;
+ u32 ocram_ecc;
+ u32 _pad_0x3c;
+ u32 sdmmc_ecc; /* 0x40 */
+ u32 usb0_ecc;
+ u32 usb1_ecc;
+ u32 clock_manager;
+ u32 _pad_0x50; /* 0x50 */
+ u32 io_manager;
+ u32 reset_manager;
+ u32 system_manager;
+ u32 osc0_timer; /* 0x60 */
+ u32 osc1_timer;
+ u32 watchdog0;
+ u32 watchdog1;
+ u32 watchdog2; /* 0x70 */
+ u32 watchdog3;
+};
+
+#define FIREWALL_L4_DISABLE_ALL (BIT(0) | BIT(24) | BIT(16))
+#define FIREWALL_BRIDGE_DISABLE_ALL (~0)
+
+#define CCU_CPU0_MPRT_ADMASK_MEM_RAM0_ADDR 0xf7004688
+#define CCU_IOM_MPRT_ADMASK_MEM_RAM0_ADDR 0xf7018628
+
+#define CCU_ADMASK_P_MASK (BIT(0))
+#define CCU_ADMASK_NS_MASK (BIT(1))
+
+#endif /* _FIREWALL_S10_ */
diff --git a/arch/arm/mach-socfpga/spl_s10.c b/arch/arm/mach-socfpga/spl_s10.c
new file mode 100644
index 0000000..12cafe6
--- /dev/null
+++ b/arch/arm/mach-socfpga/spl_s10.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+#include <image.h>
+#include <asm/arch/reset_manager.h>
+#include <spl.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/sdram_s10.h>
+#include <asm/arch/mailbox_s10.h>
+#include <asm/arch/firewall_s10.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_firwall_l4_per *firwall_l4_per_base =
+ (struct socfpga_firwall_l4_per *)SOCFPGA_FIREWALL_L4_PER;
+static const struct socfpga_firwall_l4_sys *firwall_l4_sys_base =
+ (struct socfpga_firwall_l4_sys *)SOCFPGA_FIREWALL_L4_SYS;
+
+u32 spl_boot_device(void)
+{
+ /* TODO: Get from SDM or handoff */
+/* #ifdef CONFIG_CADENCE_QSPI*/
+#if 0
+ return BOOT_DEVICE_SPI;
+#else
+ return BOOT_DEVICE_MMC1;
+#endif
+}
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+u32 spl_boot_mode(const u32 boot_device)
+{
+#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+ return MMCSD_MODE_FS;
+#else
+ return MMCSD_MODE_RAW;
+#endif
+}
+#endif
+
+void board_init_f(ulong dummy)
+{
+ const struct cm_config *cm_default_cfg = cm_get_default_config();
+
+ socfpga_per_reset(SOCFPGA_RESET(OSC1TIMER0), 0);
+ timer_init();
+
+ populate_sysmgr_pinmux();
+
+ /* configuring the HPS clocks */
+ cm_basic_init(cm_default_cfg);
+
+ /* enable console uart printing */
+#if (CONFIG_SYS_NS16550_COM1 == SOCFPGA_UART0_ADDRESS)
+ socfpga_per_reset(SOCFPGA_RESET(UART0), 0);
+ /* enables nonsecure access to UART0 */
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->uart0);
+#elif (CONFIG_SYS_NS16550_COM1 == SOCFPGA_UART1_ADDRESS)
+ socfpga_per_reset(SOCFPGA_RESET(UART1), 0);
+ /* enables nonsecure access to UART1 */
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->uart1);
+#endif
+
+ preloader_console_init();
+ cm_print_clock_quick_summary();
+
+ /* enable all EMACs */
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->emac0);
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->emac1);
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->emac2);
+ /* enables nonsecure access to all the emacs */
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->emac0rx_ecc);
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->emac0tx_ecc);
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->emac1rx_ecc);
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->emac1tx_ecc);
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->emac2rx_ecc);
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->emac2tx_ecc);
+
+ /* enables SDMMC */
+ socfpga_per_reset(SOCFPGA_RESET(SDMMC_OCP), 0);
+ socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0);
+ /* Enables nonsecure access to SDMMC */
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->sdmmc);
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->sdmmc_ecc);
+
+ /* enable i2c0 and i2c1 */
+ socfpga_per_reset(SOCFPGA_RESET(I2C0), 0);
+ socfpga_per_reset(SOCFPGA_RESET(I2C1), 0);
+ /* enables nonsecure access to i2c0 and i2c1 */
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->i2c0);
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->i2c1);
+
+ /* disable lwsocf2fpga and soc2fpga bridge security */
+ writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_SOC2FPGA);
+ writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_LWSOC2FPGA);
+
+ /* enables nonsecure access to clock mgr */
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->clock_manager);
+
+ /* enables nonsecure access to OCRAM */
+ writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->ocram_ecc);
+
+ /* disable ocram security at CCU for non secure access */
+ clrbits_le32(CCU_CPU0_MPRT_ADMASK_MEM_RAM0_ADDR,
+ CCU_ADMASK_P_MASK | CCU_ADMASK_NS_MASK);
+ clrbits_le32(CCU_IOM_MPRT_ADMASK_MEM_RAM0_ADDR,
+ CCU_ADMASK_P_MASK | CCU_ADMASK_NS_MASK);
+
+ puts("DDR: Initializing Hard Memory Controller\n");
+ if (sdram_mmr_init_full(0)) {
+ puts("DDR: Initialization failed.\n");
+ hang();
+ }
+
+ gd->ram_size = sdram_calculate_size();
+ printf("DDR: %d MiB\n", (int)(gd->ram_size >> 20));
+
+ /* Sanity check ensure correct SDRAM size specified */
+ puts("DDR: Running SDRAM size sanity check\n");
+ if (get_ram_size(0, gd->ram_size) != gd->ram_size) {
+ puts("DDR: SDRAM size check failed!\n");
+ hang();
+ }
+ puts("DDR: SDRAM size check passed!\n");
+
+#ifdef CONFIG_CADENCE_QSPI
+ mbox_init();
+ mbox_qspi_open();
+#endif
+}
--
2.2.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
