On Isn, 2017-09-25 at 11:19 +0200, Marek Vasut wrote:
> On 09/25/2017 10:40 AM, tien.fong.c...@intel.com wrote:
> >
> > From: Tien Fong Chee <tien.fong.c...@intel.com>
> >
> > Add DDR driver suppport for Arria 10.
> >
> > Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com>
> > ---
> > arch/arm/mach-socfpga/include/mach/sdram.h | 2 +
> > arch/arm/mach-socfpga/include/mach/sdram_arria10.h | 103 ++-
> > drivers/ddr/altera/sdram_arria10.c | 735
> > +++++++++++++++++++++
> > 3 files changed, 839 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/ddr/altera/sdram_arria10.c
> >
> > diff --git a/arch/arm/mach-socfpga/include/mach/sdram.h
> > b/arch/arm/mach-socfpga/include/mach/sdram.h
> > index 4a9754e..b833fc2 100644
> > --- a/arch/arm/mach-socfpga/include/mach/sdram.h
> > +++ b/arch/arm/mach-socfpga/include/mach/sdram.h
> > @@ -10,6 +10,8 @@
> >
> > #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> > #include <asm/arch/sdram_gen5.h>
> > +#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> > +#include <asm/arch/sdram_arria10.h>
> > #endif
> >
> > #endif
> > diff --git a/arch/arm/mach-socfpga/include/mach/sdram_arria10.h
> > b/arch/arm/mach-socfpga/include/mach/sdram_arria10.h
> > index 1d7b7c1..7af9431 100644
> > --- a/arch/arm/mach-socfpga/include/mach/sdram_arria10.h
> > +++ b/arch/arm/mach-socfpga/include/mach/sdram_arria10.h
> > @@ -1,5 +1,5 @@
> > /*
> > - * Copyright (C) 2015-2017 Intel Corporation <www.intel.com>
> > + * Copyright (C) 2017 Intel Corporation <www.intel.com>
> > *
> > * SPDX-License-Identifier: GPL-2.0
> > */
> > @@ -8,6 +8,7 @@
> > #define _SOCFPGA_SDRAM_ARRIA10_H_
> >
> > #ifndef __ASSEMBLY__
> > +int ddr_calibration_sequence(void);
> >
> > struct socfpga_ecc_hmc {
> > u32 ip_rev_id;
> > @@ -204,6 +205,106 @@ struct socfpga_io48_mmr {
> > u32 niosreserve1;
> > u32 niosreserve2;
> > };
> > +
> > +union dramaddrw_reg {
> > + struct {
> > + u32 cfg_col_addr_width:5;
> > + u32 cfg_row_addr_width:5;
> > + u32 cfg_bank_addr_width:4;
> > + u32 cfg_bank_group_addr_width:2;
> > + u32 cfg_cs_addr_width:3;
> > + u32 reserved:13;
> > + };
> Use regular macros for bitfields, not this crap.
>
Why regular macros is prefered? Above implementation improve
readability, simplify the implementation and saving memory.
> >
> > + u32 word;
> > +};
> > +
> > +union ctrlcfg0_reg {
> > + struct {
> > + u32 cfg_mem_type:4;
> > + u32 cfg_dimm_type:3;
> > + u32 cfg_ac_pos:2;
> > + u32 cfg_ctrl_burst_len:5;
> > + u32 reserved:18; /* Other fields unused */
> > + };
> > + u32 word;
> > +};
> [...]
>
> >
> > diff --git a/drivers/ddr/altera/sdram_arria10.c
> > b/drivers/ddr/altera/sdram_arria10.c
> > new file mode 100644
> > index 0000000..f22a726
> > --- /dev/null
> > +++ b/drivers/ddr/altera/sdram_arria10.c
> > @@ -0,0 +1,735 @@
> > +/*
> > + * Copyright (C) 2017 Intel Corporation <www.intel.com>
> > + *
> > + * SPDX-License-Identifier: GPL-2.0
> > + */
> > +
> > +#include <common.h>
> > +#include <fdtdec.h>
> > +#include <malloc.h>
> > +#include <mmc.h>
> > +#include <nand.h>
> > +#include <watchdog.h>
> > +#include <ns16550.h>
> Why does an SDRAM init driver need access to ns16550 UART , MMC and
> NAND ?
>
I will remove them.
> >
> > +#include <asm/io.h>
> > +#include <asm/arch/fpga_manager.h>
> > +#include <asm/arch/misc.h>
> > +#include <asm/arch/reset_manager.h>
> > +#include <asm/arch/sdram.h>
> > +
> > +DECLARE_GLOBAL_DATA_PTR;
> > +
> > +static void sdram_mmr_init(void);
> > +static unsigned long long sdram_size_calc(void);
> > +
> > +/* FAWBANK - Number of Bank of a given device involved in the FAW
> > period. */
> > +#define ARRIA10_SDR_ACTIVATE_FAWBANK (0x1)
> > +
> > +#define ARRIA_DDR_CONFIG(A, B, C, R) ((A<<24)|(B<<16)|(C<<8
> > )|R)
> Missing parenthesis around (A), (B) etc. ...
>
Okay.
> >
> > +#define DDR_CONFIG_ELEMENTS (sizeof(ddr_config)/sizeof(u32)
> > )
> So this is ARRAY_SIZE() ?
>
Yes. i will use ARRAY_SIZE().
> >
> > +#define DDR_REG_SEQ2CORE 0xFFD0507C
> > +#define DDR_REG_CORE2SEQ 0xFFD05078
> > +#define DDR_READ_LATENCY_DELAY 40
> > +#define DDR_SIZE_2GB_HEX 0x80000000
> > +#define DDR_MAX_TRIES 0x00100000
> > +
> > +#define IO48_MMR_DRAMSTS 0xFFCFA0EC
> > +#define IO48_MMR_NIOS2_RESERVE0 0xFFCFA110
> > +#define IO48_MMR_NIOS2_RESERVE1 0xFFCFA114
> > +#define IO48_MMR_NIOS2_RESERVE2 0xFFCFA118
> > +
> > +#define SEQ2CORE_MASK 0xF
> > +#define CORE2SEQ_INT_REQ 0xF
> > +#define SEQ2CORE_INT_RESP_BIT 3
> > +
> > +static const struct socfpga_ecc_hmc *socfpga_ecc_hmc_base =
> > + (void *)SOCFPGA_SDR_ADDRESS;
> > +static const struct socfpga_noc_ddr_scheduler
> > *socfpga_noc_ddr_scheduler_base =
> > + (void *)SOCFPGA_SDR_SCHEDULER_ADDRESS;
> > +static const struct socfpga_noc_fw_ddr_mpu_fpga2sdram
> > + *socfpga_noc_fw_ddr_mpu_fpga2sdram_base =
> > + (void *)SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS;
> > +static const struct socfpga_noc_fw_ddr_l3
> > *socfpga_noc_fw_ddr_l3_base =
> > + (void *)SOCFPGA_SDR_FIREWALL_L3_ADDRESS;
> > +static const struct socfpga_io48_mmr *socfpga_io48_mmr_base =
> > + (void *)SOCFPGA_HMC_MMR_IO48_ADDRESS;
> > +
> > +/* The followring are the supported configurations */
> > +static u32 ddr_config[] = {
> > + /* Chip - Row - Bank - Column Style */
> > + /* All Types */
> > + ARRIA_DDR_CONFIG(0, 3, 10, 12),
> > + ARRIA_DDR_CONFIG(0, 3, 10, 13),
> > + ARRIA_DDR_CONFIG(0, 3, 10, 14),
> > + ARRIA_DDR_CONFIG(0, 3, 10, 15),
> > + ARRIA_DDR_CONFIG(0, 3, 10, 16),
> > + ARRIA_DDR_CONFIG(0, 3, 10, 17),
> > + /* LPDDR x16 */
> > + ARRIA_DDR_CONFIG(0, 3, 11, 14),
> > + ARRIA_DDR_CONFIG(0, 3, 11, 15),
> > + ARRIA_DDR_CONFIG(0, 3, 11, 16),
> > + ARRIA_DDR_CONFIG(0, 3, 12, 15),
> > + /* DDR4 Only */
> > + ARRIA_DDR_CONFIG(0, 4, 10, 14),
> > + ARRIA_DDR_CONFIG(0, 4, 10, 15),
> > + ARRIA_DDR_CONFIG(0, 4, 10, 16),
> > + ARRIA_DDR_CONFIG(0, 4, 10, 17), /* 14 */
> > + /* Chip - Bank - Row - Column Style */
> > + ARRIA_DDR_CONFIG(1, 3, 10, 12),
> > + ARRIA_DDR_CONFIG(1, 3, 10, 13),
> > + ARRIA_DDR_CONFIG(1, 3, 10, 14),
> > + ARRIA_DDR_CONFIG(1, 3, 10, 15),
> > + ARRIA_DDR_CONFIG(1, 3, 10, 16),
> > + ARRIA_DDR_CONFIG(1, 3, 10, 17),
> > + ARRIA_DDR_CONFIG(1, 3, 11, 14),
> > + ARRIA_DDR_CONFIG(1, 3, 11, 15),
> > + ARRIA_DDR_CONFIG(1, 3, 11, 16),
> > + ARRIA_DDR_CONFIG(1, 3, 12, 15),
> > + /* DDR4 Only */
> > + ARRIA_DDR_CONFIG(1, 4, 10, 14),
> > + ARRIA_DDR_CONFIG(1, 4, 10, 15),
> > + ARRIA_DDR_CONFIG(1, 4, 10, 16),
> > + ARRIA_DDR_CONFIG(1, 4, 10, 17),
> > +};
> > +
> > +static int match_ddr_conf(u32 ddr_conf)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < DDR_CONFIG_ELEMENTS; i++) {
> > + if (ddr_conf == ddr_config[i])
> > + return i;
> > + }
> > + return 0;
> > +}
> > +
> > +/* Check whether SDRAM is successfully Calibrated */
> > +static int is_sdram_cal_success(void)
> > +{
> > + return readl(&socfpga_ecc_hmc_base->ddrcalstat);
> > +}
> > +
> > +static unsigned char ddr_get_bit(u32 ereg, unsigned char bit)
> > +{
> > + u32 reg = readl(ereg);
> > +
> > + return (reg & (1 << bit)) ? 1 : 0;
> Urgh, BIT() and just use it inline and drop this
>
Okay.
> >
> > +}
> > +
> > +static unsigned char ddr_wait_bit(u32 ereg, u32 bit,
> > + u32 expected, u32 timeout_usec)
> > +{
> > + u32 tmr;
> > +
> > + for (tmr = 0; tmr < timeout_usec; tmr += 100) {
> > + udelay(100);
> > + WATCHDOG_RESET();
> > + if (ddr_get_bit(ereg, bit) == expected)
> > + return 0;
> > + }
> > +
> > + return 1;
> > +}
> > +
> > +static void ddr_delay(u32 delay)
> > +{
> > + int tmr;
> > +
> > + for (tmr = 0; tmr < delay; tmr++) {
> > + udelay(1000);
> > + WATCHDOG_RESET();
> So this is mdelay(delay) ?
>
Yes, i can use mdelay.
> >
> > + }
> > +}
> > +
> > +static int emif_clear(void)
> > +{
> > + u32 s2c;
> > + u32 i = DDR_MAX_TRIES;
> > +
> > + writel(0, DDR_REG_CORE2SEQ);
> > + do {
> > + ddr_delay(50);
> > + s2c = readl(DDR_REG_SEQ2CORE);
> > + } while ((s2c & SEQ2CORE_MASK) && (--i > 0));
> wait_for_bit() or something ?
>
Okay.
> >
> > + return !i;
> > +}
> > +
> > +static int emif_reset(void)
> > +{
> > + u32 c2s, s2c;
> > +
> > + c2s = readl(DDR_REG_CORE2SEQ);
> > + s2c = readl(DDR_REG_SEQ2CORE);
> > +
> > + debug("c2s=%08x s2c=%08x nr0=%08x nr1=%08x nr2=%08x
> > dst=%08x\n",
> > + c2s, s2c, readl(IO48_MMR_NIOS2_RESERVE0),
> > + readl(IO48_MMR_NIOS2_RESERVE1),
> > + readl(IO48_MMR_NIOS2_RESERVE2),
> > + readl(IO48_MMR_DRAMSTS));
> > +
> > + if ((s2c & SEQ2CORE_MASK) && emif_clear()) {
> > + printf("failed emif_clear()\n");
> > + return -1;
> > + }
> > +
> > + writel(CORE2SEQ_INT_REQ, DDR_REG_CORE2SEQ);
> > +
> > + if (ddr_wait_bit(DDR_REG_SEQ2CORE, SEQ2CORE_INT_RESP_BIT,
> > 0, 1000000)) {
> > + printf("emif_reset failed to see interrupt
> > acknowledge\n");
> > + return -2;
> Use proper errno.h codes
>
Okay.
> >
> > + } else {
> > + printf("emif_reset interrupt acknowledged\n");
> > + }
> > +
> > + if (emif_clear()) {
> > + printf("emif_clear() failed\n");
> > + return -3;
> > + }
> > + debug("emif_reset interrupt cleared\n");
> > +
> > + debug("nr0=%08x nr1=%08x nr2=%08x\n",
> > + readl(IO48_MMR_NIOS2_RESERVE0),
> > + readl(IO48_MMR_NIOS2_RESERVE1),
> > + readl(IO48_MMR_NIOS2_RESERVE2));
> > +
> > + return 0;
> > +}
> [...]
>
> >
> > +struct firewall_entry {
> > + const char *prop_name;
> > + const u32 cfg_addr;
> > + const u32 en_addr;
> > + const u32 en_bit;
> > +};
> > +#define FW_MPU_FPGA_ADDRESS \
> > + ((const struct socfpga_noc_fw_ddr_mpu_fpga2sdram *)\
> > + SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS)
> > +const struct firewall_entry firewall_table[] = {
> > + {
> This seems to be mostly copy-paste of the same stuff ... fix with
> macro.
>
Okay.
> >
> > + "altr,mpu0",
> > + SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS +
> > + offsetof(struct socfpga_noc_fw_ddr_mpu_fpga2sdram,
> > + mpuregion0addr),
> > + SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS +
> > + offsetof(struct socfpga_noc_fw_ddr_mpu_fpga2sdram,
> > + enable),
> > + ALT_NOC_FW_DDR_SCR_EN_MPUREG0EN_SET_MSK
> > + },
> > + {
> > + "altr,mpu1",
> > + SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS +
> > + offsetof(struct socfpga_noc_fw_ddr_mpu_fpga2sdram,
> > + mpuregion1addr),
> > + SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS +
> > + offsetof(struct socfpga_noc_fw_ddr_mpu_fpga2sdram,
> > + enable),
> > + ALT_NOC_FW_DDR_SCR_EN_MPUREG1EN_SET_MSK
> > + },
> [...]
>
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
