Need to set gmac m1 pins iomux, gmac m0 tx pins, select bit2
and bit10 at com iomux register. After that, set rgmii m1 tx
pins to 12ma drive-strength, and clean others to 2ma.
Signed-off-by: David Wu <david...@rock-chips.com>
---
Changes in v2:
- New patch
drivers/pinctrl/rockchip/pinctrl_rk3328.c | 236 ++++++++++++++++++++++++++++++
1 file changed, 236 insertions(+)
diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3328.c
b/drivers/pinctrl/rockchip/pinctrl_rk3328.c
index 0042025..c155027 100644
--- a/drivers/pinctrl/rockchip/pinctrl_rk3328.c
+++ b/drivers/pinctrl/rockchip/pinctrl_rk3328.c
@@ -72,6 +72,69 @@ enum {
GPIO1A0_SEL_MASK = 0x3fff << GPIO1A0_SEL_SHIFT,
GPIO1A0_CARD_DATA_CLK_CMD_DETN = 0x1555,
+ /* GPIO1B_IOMUX */
+ GPIO1B0_SEL_SHIFT = 0,
+ GPIO1B0_SEL_MASK = GENMASK(1, 0),
+ GPIO1B0_GMAC_TXD1M1 = 2,
+
+ GPIO1B1_SEL_SHIFT = 2,
+ GPIO1B1_SEL_MASK = GENMASK(3, 2),
+ GPIO1B1_GMAC_TXD0M1 = 2,
+
+ GPIO1B2_SEL_SHIFT = 4,
+ GPIO1B2_SEL_MASK = GENMASK(5, 4),
+ GPIO1B2_GMAC_RXD1M1 = 2,
+
+ GPIO1B3_SEL_SHIFT = 6,
+ GPIO1B3_SEL_MASK = GENMASK(7, 6),
+ GPIO1B3_GMAC_RXD0M1 = 2,
+
+ GPIO1B4_SEL_SHIFT = 8,
+ GPIO1B4_SEL_MASK = GENMASK(9, 8),
+ GPIO1B4_GMAC_TXCLKM1 = 2,
+
+ GPIO1B5_SEL_SHIFT = 10,
+ GPIO1B5_SEL_MASK = GENMASK(11, 10),
+ GPIO1B5_GMAC_RXCLKM1 = 2,
+
+ GPIO1B6_SEL_SHIFT = 12,
+ GPIO1B6_SEL_MASK = GENMASK(13, 12),
+ GPIO1B6_GMAC_RXD3M1 = 2,
+
+ GPIO1B7_SEL_SHIFT = 14,
+ GPIO1B7_SEL_MASK = GENMASK(15, 14),
+ GPIO1B7_GMAC_RXD2M1 = 2,
+
+ /* GPIO1C_IOMUX */
+ GPIO1C0_SEL_SHIFT = 0,
+ GPIO1C0_SEL_MASK = GENMASK(1, 0),
+ GPIO1C0_GMAC_TXD3M1 = 2,
+
+ GPIO1C1_SEL_SHIFT = 2,
+ GPIO1C1_SEL_MASK = GENMASK(3, 2),
+ GPIO1C1_GMAC_TXD2M1 = 2,
+
+ GPIO1C3_SEL_SHIFT = 6,
+ GPIO1C3_SEL_MASK = GENMASK(7, 6),
+ GPIO1C3_GMAC_MDIOM1 = 2,
+
+ GPIO1C5_SEL_SHIFT = 10,
+ GPIO1C5_SEL_MASK = GENMASK(11, 10),
+ GPIO1C5_GMAC_CLKM1 = 2,
+
+ GPIO1C6_SEL_SHIFT = 12,
+ GPIO1C6_SEL_MASK = GENMASK(13, 12),
+ GPIO1C6_GMAC_RXDVM1 = 2,
+
+ GPIO1C7_SEL_SHIFT = 14,
+ GPIO1C7_SEL_MASK = GENMASK(15, 14),
+ GPIO1C7_GMAC_MDCM1 = 2,
+
+ /* GPIO1D_IOMUX */
+ GPIO1D1_SEL_SHIFT = 2,
+ GPIO1D1_SEL_MASK = GENMASK(3, 2),
+ GPIO1D1_GMAC_TXENM1 = 2,
+
/* GPIO2A_IOMUX */
GPIO2A0_SEL_SHIFT = 0,
GPIO2A0_SEL_MASK = 3 << GPIO2A0_SEL_SHIFT,
@@ -149,6 +212,11 @@ enum {
IOMUX_SEL_UART2_M0 = 0,
IOMUX_SEL_UART2_M1,
+ IOMUX_SEL_GMAC_SHIFT = 2,
+ IOMUX_SEL_GMAC_MASK = BIT(2),
+ IOMUX_SEL_GMAC_M0 = 0,
+ IOMUX_SEL_GMAC_M1,
+
IOMUX_SEL_SPI_SHIFT = 4,
IOMUX_SEL_SPI_MASK = 3 << IOMUX_SEL_SPI_SHIFT,
IOMUX_SEL_SPI_M0 = 0,
@@ -159,6 +227,47 @@ enum {
IOMUX_SEL_SDMMC_MASK = 1 << IOMUX_SEL_SDMMC_SHIFT,
IOMUX_SEL_SDMMC_M0 = 0,
IOMUX_SEL_SDMMC_M1,
+
+ IOMUX_SEL_GMACM1_OPTIMIZATION_SHIFT = 10,
+ IOMUX_SEL_GMACM1_OPTIMIZATION_MASK = BIT(10),
+ IOMUX_SEL_GMACM1_OPTIMIZATION_BEFORE = 0,
+ IOMUX_SEL_GMACM1_OPTIMIZATION_AFTER,
+
+ /* GRF_GPIO1B_E */
+ GRF_GPIO1B0_E_SHIFT = 0,
+ GRF_GPIO1B0_E_MASK = GENMASK(1, 0),
+ GRF_GPIO1B1_E_SHIFT = 2,
+ GRF_GPIO1B1_E_MASK = GENMASK(3, 2),
+ GRF_GPIO1B2_E_SHIFT = 4,
+ GRF_GPIO1B2_E_MASK = GENMASK(5, 4),
+ GRF_GPIO1B3_E_SHIFT = 6,
+ GRF_GPIO1B3_E_MASK = GENMASK(7, 6),
+ GRF_GPIO1B4_E_SHIFT = 8,
+ GRF_GPIO1B4_E_MASK = GENMASK(9, 8),
+ GRF_GPIO1B5_E_SHIFT = 10,
+ GRF_GPIO1B5_E_MASK = GENMASK(11, 10),
+ GRF_GPIO1B6_E_SHIFT = 12,
+ GRF_GPIO1B6_E_MASK = GENMASK(13, 12),
+ GRF_GPIO1B7_E_SHIFT = 14,
+ GRF_GPIO1B7_E_MASK = GENMASK(15, 14),
+
+ /* GRF_GPIO1C_E */
+ GRF_GPIO1C0_E_SHIFT = 0,
+ GRF_GPIO1C0_E_MASK = GENMASK(1, 0),
+ GRF_GPIO1C1_E_SHIFT = 2,
+ GRF_GPIO1C1_E_MASK = GENMASK(3, 2),
+ GRF_GPIO1C3_E_SHIFT = 6,
+ GRF_GPIO1C3_E_MASK = GENMASK(7, 6),
+ GRF_GPIO1C5_E_SHIFT = 10,
+ GRF_GPIO1C5_E_MASK = GENMASK(11, 10),
+ GRF_GPIO1C6_E_SHIFT = 12,
+ GRF_GPIO1C6_E_MASK = GENMASK(13, 12),
+ GRF_GPIO1C7_E_SHIFT = 14,
+ GRF_GPIO1C7_E_MASK = GENMASK(15, 14),
+
+ /* GRF_GPIO1D_E */
+ GRF_GPIO1D1_E_SHIFT = 2,
+ GRF_GPIO1D1_E_MASK = GENMASK(3, 2),
};
struct rk3328_pinctrl_priv {
@@ -344,6 +453,124 @@ static void pinctrl_rk3328_sdmmc_config(struct
rk3328_grf_regs *grf,
}
}
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+static void pinctrl_rk3328_gmac_config(struct rk3328_grf_regs *grf, int
gmac_id)
+{
+ switch (gmac_id) {
+ case PERIPH_ID_GMAC:
+ /* set rgmii m1 pins mux */
+ rk_clrsetreg(&grf->gpio1b_iomux,
+ GPIO1B0_SEL_MASK |
+ GPIO1B1_SEL_MASK |
+ GPIO1B2_SEL_MASK |
+ GPIO1B3_SEL_MASK |
+ GPIO1B4_SEL_MASK |
+ GPIO1B5_SEL_MASK |
+ GPIO1B6_SEL_MASK |
+ GPIO1B7_SEL_MASK,
+ GPIO1B0_GMAC_TXD1M1 << GPIO1B0_SEL_SHIFT |
+ GPIO1B1_GMAC_TXD0M1 << GPIO1B1_SEL_SHIFT |
+ GPIO1B2_GMAC_RXD1M1 << GPIO1B2_SEL_SHIFT |
+ GPIO1B3_GMAC_RXD0M1 << GPIO1B3_SEL_SHIFT |
+ GPIO1B4_GMAC_TXCLKM1 << GPIO1B4_SEL_SHIFT |
+ GPIO1B5_GMAC_RXCLKM1 << GPIO1B5_SEL_SHIFT |
+ GPIO1B6_GMAC_RXD3M1 << GPIO1B6_SEL_SHIFT |
+ GPIO1B7_GMAC_RXD2M1 << GPIO1B7_SEL_SHIFT);
+
+ rk_clrsetreg(&grf->gpio1c_iomux,
+ GPIO1C0_SEL_MASK |
+ GPIO1C1_SEL_MASK |
+ GPIO1C3_SEL_MASK |
+ GPIO1C5_SEL_MASK |
+ GPIO1C6_SEL_MASK |
+ GPIO1C7_SEL_MASK,
+ GPIO1C0_GMAC_TXD3M1 << GPIO1C0_SEL_SHIFT |
+ GPIO1C1_GMAC_TXD2M1 << GPIO1C1_SEL_SHIFT |
+ GPIO1C3_GMAC_MDIOM1 << GPIO1C3_SEL_SHIFT |
+ GPIO1C5_GMAC_CLKM1 << GPIO1C5_SEL_SHIFT |
+ GPIO1C6_GMAC_RXDVM1 << GPIO1C6_SEL_SHIFT |
+ GPIO1C7_GMAC_MDCM1 << GPIO1C7_SEL_SHIFT);
+
+ rk_clrsetreg(&grf->gpio1d_iomux,
+ GPIO1D1_SEL_MASK,
+ GPIO1D1_GMAC_TXENM1 << GPIO1D1_SEL_SHIFT);
+
+ /* set rgmii m0 tx pins mux */
+ rk_clrsetreg(&grf->gpio0b_iomux,
+ GPIO0B0_SEL_MASK |
+ GPIO0B4_SEL_MASK,
+ GPIO0B0_GAMC_CLKTXM0 << GPIO0B0_SEL_SHIFT |
+ GPIO0B4_GAMC_TXENM0 << GPIO0B4_SEL_SHIFT);
+
+ rk_clrsetreg(&grf->gpio0c_iomux,
+ GPIO0C0_SEL_MASK |
+ GPIO0C1_SEL_MASK |
+ GPIO0C6_SEL_MASK |
+ GPIO0C7_SEL_MASK,
+ GPIO0C0_GAMC_TXD1M0 << GPIO0C0_SEL_SHIFT |
+ GPIO0C1_GAMC_TXD0M0 << GPIO0C1_SEL_SHIFT |
+ GPIO0C6_GAMC_TXD2M0 << GPIO0C6_SEL_SHIFT |
+ GPIO0C7_GAMC_TXD3M0 << GPIO0C7_SEL_SHIFT);
+
+ rk_clrsetreg(&grf->gpio0d_iomux,
+ GPIO0D0_SEL_MASK,
+ GPIO0D0_GMAC_CLKM0 << GPIO0D0_SEL_SHIFT);
+
+ /* set com mux */
+ rk_clrsetreg(&grf->com_iomux,
+ IOMUX_SEL_GMAC_MASK |
+ IOMUX_SEL_GMACM1_OPTIMIZATION_MASK,
+ IOMUX_SEL_GMAC_M1 << IOMUX_SEL_GMAC_SHIFT |
+ IOMUX_SEL_GMACM1_OPTIMIZATION_AFTER <<
+ IOMUX_SEL_GMACM1_OPTIMIZATION_SHIFT);
+
+ /*
+ * set rgmii m1 tx pins to 12ma drive-strength,
+ * and clean others to 2ma.
+ */
+ rk_clrsetreg(&grf->gpio1b_e,
+ GRF_GPIO1B0_E_MASK |
+ GRF_GPIO1B1_E_MASK |
+ GRF_GPIO1B2_E_MASK |
+ GRF_GPIO1B3_E_MASK |
+ GRF_GPIO1B4_E_MASK |
+ GRF_GPIO1B5_E_MASK |
+ GRF_GPIO1B6_E_MASK |
+ GRF_GPIO1B7_E_MASK,
+ 0x3 << GRF_GPIO1B0_E_SHIFT |
+ 0x3 << GRF_GPIO1B1_E_SHIFT |
+ 0x0 << GRF_GPIO1B2_E_SHIFT |
+ 0x0 << GRF_GPIO1B3_E_SHIFT |
+ 0x3 << GRF_GPIO1B4_E_SHIFT |
+ 0x0 << GRF_GPIO1B5_E_SHIFT |
+ 0x0 << GRF_GPIO1B6_E_SHIFT |
+ 0x0 << GRF_GPIO1B7_E_SHIFT);
+
+ rk_clrsetreg(&grf->gpio1c_e,
+ GRF_GPIO1C0_E_MASK |
+ GRF_GPIO1C1_E_MASK |
+ GRF_GPIO1C3_E_MASK |
+ GRF_GPIO1C5_E_MASK |
+ GRF_GPIO1C6_E_MASK |
+ GRF_GPIO1C7_E_MASK,
+ 0x3 << GRF_GPIO1C0_E_SHIFT |
+ 0x3 << GRF_GPIO1C1_E_SHIFT |
+ 0x0 << GRF_GPIO1C3_E_SHIFT |
+ 0x0 << GRF_GPIO1C5_E_SHIFT |
+ 0x0 << GRF_GPIO1C6_E_SHIFT |
+ 0x0 << GRF_GPIO1C7_E_SHIFT);
+
+ rk_clrsetreg(&grf->gpio1d_e,
+ GRF_GPIO1D1_E_MASK,
+ 0x3 << GRF_GPIO1D1_E_SHIFT);
+ break;
+ default:
+ debug("gmac id = %d iomux error!\n", gmac_id);
+ break;
+ }
+}
+#endif
+
static int rk3328_pinctrl_request(struct udevice *dev, int func, int flags)
{
struct rk3328_pinctrl_priv *priv = dev_get_priv(dev);
@@ -380,6 +607,11 @@ static int rk3328_pinctrl_request(struct udevice *dev, int
func, int flags)
case PERIPH_ID_SDMMC1:
pinctrl_rk3328_sdmmc_config(priv->grf, func);
break;
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+ case PERIPH_ID_GMAC:
+ pinctrl_rk3328_gmac_config(priv->grf, func);
+ break;
+#endif
default:
return -EINVAL;
}
@@ -414,6 +646,10 @@ static int rk3328_pinctrl_get_periph_id(struct udevice
*dev,
return PERIPH_ID_SDCARD;
case 14:
return PERIPH_ID_EMMC;
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+ case 24:
+ return PERIPH_ID_GMAC;
+#endif
}
return -ENOENT;
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
