On Tuesday 29 December 2009 16:04:28 prakash bedge wrote: > I am facing an error while flashing u-boot on my PPC4xx based board.
What kind of PPC4xx are you using (405EX, 440SP, 440EPx, 460EX...)? > When I flash the u-boot on the PCI board I am developing, and hard reset > the board, then the board is not able to boot up. > Also I am not able to debug the code as probe connection fails. > > Whar are the reason that I should check to see why the board is not booting > up after hard reset. > Is it fault in start.S or somewhere else in code I need to see? > > It would be great if someone who already have a solution on this > porblem, share his experience. I suspect some problems with the bootstrap configuration. Are you using a fixed bootstrap option? Or are you using the bootstrap I2C EEPROM? If yes, is this EEPROM configured correctly? Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: [email protected] _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
