Hi everyone. I was testing the booting process from NAND using an UBI/UBIFS image in an igepv2 board. However MLO tries to boot first kernel (falcon mode activated) and then falls back to u-boot (as expected anyway I just wanted to load u-boot from ubi) trying to load volume 0, but fails.
U-Boot SPL 2017.11-dirty (Nov 24 2017 - 14:29:26) Trying to boot from NAND UBI warning: LEB 0 of 1 is missing UBI warning: Failed to load volume 3 UBI warning: LEB 0 of 1 is missing UBI warning: Failed to load volume 3 UBI warning: Failed Loading Linux failed, falling back to U-Boot. UBI warning: LEB 0 of 1 is missing UBI warning: Failed to load volume 0 UBI warning: LEB 0 of 1 is missing UBI warning: Failed to load volume 0 UBI warning: Failed SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### I can however mount the ubi image but suspicious log appear: u-boot:> ubifsmount ubi0:ubirootfs UBIFS assert failed in ubifs_change_lp at 540 UBIFS assert failed in ubifs_release_lprops at 278 UBIFS assert failed in ubifs_change_lp at 540 UBIFS assert failed in ubifs_release_lprops at 278 This has to do with the discussion about ubifs null deference so I suppose it should not affect much to write operation. I would finally like to know if the ubi/ubifs support is functional; which would mean I did not use the ubi tools correctly to create the ubi image. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot