On Fri, Jan 12, 2018 at 4:00 AM, Mehmet Ali İPİN <mehmet.i...@pavotek.com.tr> wrote: > > > From: Mehmet Ali İPİN > Sent: Friday, January 12, 2018 8:39 AM > To: 'u-b...@lists.dex.de' <u-b...@lists.dex.de> > Subject: u-boot v2016 vs v2013 > > Dear Sir/Madam, > > Hello, > > We have an i.mx6dl board which was referenced to sabreauto kit, except we use > KSZ9021 as phy chip instead of AR8031. We installed the krogoth and jethro > versions of yocto; as result u-booth 2016 and 2013 versions were installed > accordingly. When downloaded the code > 2013 u-boot version controlled the phy chip, even we did not touch the > ethernet-phy related files. > > But for u-boot 2016, even we modified the config and source files according > to KSZ9021, even MDO and MDCLK pins are not activated. > > I would be very grateful, if anybody knows a solution about this problem > and/or give me a direction.
Please try 2018.01 instead. Another suggestion is to do a similar changes in your board file like this: http://git.denx.de/?p=u-boot.git;a=commitdiff;h=dac09fc10b71045ac261a9b8a05d34029ebec2ae;hp=0f7c6cdc8143d6cf0577a84bf27bdaadd6229ff4 Regards, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
