Dear Estevam, Thank you for your helps. I finally managed to build u-boot-2018. With these commands: export CROSS_COMPILE=/opt/gcc-arm-none-eabi-7-2017-q4-major/bin/arm-none-eabi- export ARCH=arm make distclean make mx6sabreauto_defconfig make
There are u-boot, u-boot.bin, u-boot.img, ... files, but I could not see u-boot.imx file, which we use it to download to the DDR via USB, with usb_loader program. I used u-boot-2016 lately, which was generating .imx file; Do you know if we can generate it with 2018.1? Best regards. -----Original Message----- From: Fabio Estevam [mailto:feste...@gmail.com] Sent: Tuesday, January 16, 2018 2:49 PM To: Mehmet Ali İPİN <mehmet.i...@pavotek.com.tr> Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] FW: u-boot v2016 vs v2013 On Tue, Jan 16, 2018 at 8:47 AM, Mehmet Ali İPİN <mehmet.i...@pavotek.com.tr> wrote: > Dear Estevam. > > Thank you for your helps and interests, > > I downloaded and installed gcc/g++ version 7.2 but, make file of u-boot-2018 > gives the message below: > > *** Your GCC is older than 6.0 and is not supported > make: *** [checkgcc6] Error 1 > > but my gcc version is 7.2.0 > > mai@ubuntu:~/u-boot-2018.01$ gcc --version gcc (Ubuntu > 7.2.0-1ubuntu1~14.04) 7.2.0 This is your host PC GCC. You need to upgrade your cross-compile GCC. Or for a quick test you can do: git revert 6b867dabe84bae1e7 , which will allow you to build with your old GCC. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot