Hi Vincenzo, On Sat, Feb 3, 2018 at 3:34 AM, vnktux <vnk...@protonmail.com> wrote: > Hi all, > > I have just received from ADI Engineering a MinnowBoard Turbot Quad-core > (Baytrail E3845). > I wanted to compile bare metal U-Boot according to the README.x86 in the doc > folder. Unfortunately the board doesn't boot and doesn't print any > informations on the serial port. I know that also someone else have the same > problem, but I couldn't find any solutions on internet. It look like the > board doesn't load the correct microcode. > > I got the descriptor file from the original firmware. > Then for the FSP binary I tried the one from the official Intel Github repo, > and also the one you can download from Intelfirmware.com called FSP Gold 2014 > Minnowmax. > > From the official UEFI firmware I can see the following specs: > CPU Family: 6 > Model: 7 > Step: 9 > Microcode: 906 > Sig: 0x30679 > PF: 0x1 > > Did anybody succeeded to boot U-Boot on the new Turbot board?
It should not be the microcode problem as U-Boot ships m0130679907.dtsi which is newer than what you get (906) Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot