Hi Jagan, On Tue, Mar 6, 2018 at 9:25 AM, Jagan Teki <jagannadh.t...@gmail.com> wrote: > Hi, > > U-Boot SPL 2018.03-rc3-00111-g0cb2734156-dirty (Mar 06 2018 - 17:19:36 +0530) > Trying to boot from USB SDP > SDP: initialize... > SDP: handle requests... > > and SPL reenumerated USB VID/PID as > [24774.255201] usb 1-2: new high-speed USB device number 101 using xhci_hcd > [24774.425174] usb 1-2: New USB device found, idVendor=0525, idProduct=b4a4 > [24774.425181] usb 1-2: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [24774.425185] usb 1-2: Product: USB download gadget > [24774.425189] usb 1-2: Manufacturer: FSL > [24774.433598] hid-generic 0003:0525:B4A4.005C: hiddev97,hidraw2: USB > HID v1.10 Device [FSL USB download gadget] > > Now I've launched u-boot-dtb.img > > $ imx_usb u-boot-dtb.img > ... > vid=0x0525 pid=0xb4a4 file_name=mx6_usb_sdp_spl.conf > config file <.//mx6_usb_sdp_spl.conf> > parse .//mx6_usb_sdp_spl.conf > Trying to open device vid=0x0525 pid=0xb4a4 > Interface 0 claimed > HAB security state: development mode (0x56787856) > == work item > filename /work/code/u-boot/u-boot-dtb.img > load_size 0 bytes > load_addr 0x00000000 > dcd 1 > clear_dcd 0 > plug 1 > jump_mode 2 > jump_addr 0x00000000 > == end work item > > unknown load address > DoIRomDownload failed, err=-3 > HAB security state: development mode (0x56787856) > > Here is mx6_usb_sdp_spl.conf file > mx6_spl_sdp > hid,uboot_header,1024,0x910000,0x10000000,512M,0x00900000,0x40000 > > Look like the u-boot-dtb.img has FIT header and imx_usb can't process > the same, any help?
Is this a regression? If so, are you able to run a 'git bisect'? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot