Hi, On 06/03/18 21:38, Tuomas Tynkkynen wrote: > In README.sunxi64 we tell the user how to optionally create > u-boot-sunxi-with-spl.bin by manually running cat. Instead, have the > build system create the file automatically just like it does for 32-bit > sunxi boards. > > Signed-off-by: Tuomas Tynkkynen <tuo...@tuxera.com>
Reviewed-by: Andre Przywara <andre.przyw...@arm.com> Cheers, Andre. > --- > Makefile | 5 +++++ > board/sunxi/README.sunxi64 | 3 +-- > 2 files changed, 6 insertions(+), 2 deletions(-) > > diff --git a/Makefile b/Makefile > index 24a79446d8..4b203a0155 100644 > --- a/Makefile > +++ b/Makefile > @@ -1191,8 +1191,13 @@ u-boot-x86-16bit.bin: u-boot FORCE > endif > > ifneq ($(CONFIG_ARCH_SUNXI),) > +ifeq ($(CONFIG_ARM64),) > u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE > $(call if_changed,binman) > +else > +u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE > + $(call if_changed,cat) > +endif > endif > > ifneq ($(CONFIG_TEGRA),) > diff --git a/board/sunxi/README.sunxi64 b/board/sunxi/README.sunxi64 > index c492f749b8..5a363d27b8 100644 > --- a/board/sunxi/README.sunxi64 > +++ b/board/sunxi/README.sunxi64 > @@ -95,9 +95,8 @@ Transfer the SPL and the U-Boot FIT image directly to an > uSD card: > (replace /dev/sdx with you SD card device file name, which could be > /dev/mmcblk[x] as well). > > -Alternatively you can concatenate the SPL and the U-Boot FIT image into a > +Alternatively you can use the SPL and the U-Boot FIT image combined into a > single file and transfer that instead: > -$ cat spl/sunxi-spl.bin u-boot.itb > u-boot-sunxi-with-spl.bin > # dd if=u-boot-sunxi-with-spl.bin of=/dev/sdx bs=8k seek=1 > > You can partition the microSD card, but leave the first MB unallocated (most > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot