Spam detection software, running on the system "lists.denx.de",
has identified this incoming email as possible spam.  The original
message has been attached to this so you can view it or label
similar future email.  If you have any questions, see
@@CONTACT_ADDRESS@@ for details.

Content preview:  This adds the detection pin for the USB OTG port of the 
tablet.
   It allows properly detecting OTG cables and using connected devices when
  they are supported. Signed-off-by: Paul Kocialkowski <[email protected]> ---
   configs/Ainol_AW1_defconfig | 1 + 1 file changed, 1 insertion(+) [...] 

Content analysis details:   (5.2 points, 5.0 required)

 pts rule name              description
---- ---------------------- --------------------------------------------------
 1.3 RCVD_IN_RP_RNBL        RBL: Relay in RNBL,
                            https://senderscore.org/blacklistlookup/
                           [77.128.107.220 listed in bl.score.senderscore.com]
 0.0 RCVD_IN_SORBS_DUL      RBL: SORBS: sent directly from dynamic IP address
                            [77.128.107.220 listed in dnsbl.sorbs.net]
 3.6 RCVD_IN_PBL            RBL: Received via a relay in Spamhaus PBL
                            [77.128.107.220 listed in zen.spamhaus.org]
 0.4 RDNS_DYNAMIC           Delivered to internal network by host with
                            dynamic-looking rDNS


--- Begin Message ---
This adds the detection pin for the USB OTG port of the tablet.
It allows properly detecting OTG cables and using connected
devices when they are supported.

Signed-off-by: Paul Kocialkowski <[email protected]>
---
 configs/Ainol_AW1_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig
index e11e75d418..9fb464b703 100644
--- a/configs/Ainol_AW1_defconfig
+++ b/configs/Ainol_AW1_defconfig
@@ -6,6 +6,7 @@ CONFIG_DRAM_ZQ=123
 CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_USB0_VBUS_PIN="PB9"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH4"
 CONFIG_AXP_GPIO=y
 
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:40000,le:87,ri:112,up:38,lo:141,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_POWER="PH8"
-- 
2.16.2


--- End Message ---
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot

Reply via email to