Attempting to build SPL without CONFIG_SPL_SERIAL_SUPPORT defined fails in assorted ways. This series fixes up those failures.
Green Travis build: https://travis-ci.org/akiernan/u-boot/builds/368288275 Changes in v2: - Rebase against master - Update Travis build URL - Introduce default y PRINTF/SPRINTF/STRTO symbol so CONFIG_IS_ENABLED works without any additional ifdefs - Remove ifdef dance with SPL/TPL now PRINTF exists as its own symbol - Guard select if SPL/TPL_{SPRINTF,STRTO} symbols with SPL/TPL Alex Kiernan (8): Cleanup CONFIG_SPL_SERIAL_SUPPORT migration spl: ti: Avoid preloader_console_init if !CONFIG_SPL_SERIAL_SUPPORT spl: Add dependency on serial to Ymodem spl: ti: Avoid serial calls when serial support is disabled spl: Split sprintf, strto* from SPL serial in Kconfig spl: Disable printf if not required Consolidate __assert_failed into one implementation spl: disk: usb: Add dependencies to sprintf/strto* arch/arm/mach-omap2/boot-common.c | 3 ++- board/ti/am335x/board.c | 2 ++ common/spl/Kconfig | 6 +++++ common/spl/spl.c | 2 ++ configs/controlcenterdc_defconfig | 1 + configs/ls1021aiot_sdcard_defconfig | 1 + configs/ls1046aqds_nand_defconfig | 1 + configs/ls1046aqds_sdcard_ifc_defconfig | 1 + configs/ls1046aqds_sdcard_qspi_defconfig | 1 + configs/ls1046ardb_emmc_defconfig | 1 + configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 1 + configs/ls1046ardb_sdcard_defconfig | 1 + disk/Kconfig | 4 +++ drivers/usb/musb-new/Kconfig | 4 +++ include/configs/controlcenterdc.h | 1 - include/configs/ls1021aiot.h | 1 - include/configs/ls1046a_common.h | 2 -- lib/Kconfig | 34 +++++++++++++++++++++++++ lib/Makefile | 15 +++++------ lib/panic.c | 10 ++++++++ lib/tiny-printf.c | 21 +++++---------- lib/vsprintf.c | 11 ++------ 22 files changed, 87 insertions(+), 37 deletions(-) -- 2.7.4 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
