From: Ian Ray <[email protected]> Configure video arguments at run-time instead of at compile-time.
Signed-off-by: Ian Ray <[email protected]> Signed-off-by: Nandor Han <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> --- board/ge/bx50v3/bx50v3.c | 3 +++ include/configs/ge_bx50v3.h | 5 +---- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c index b969d6255808..33f7ee6e3be5 100644 --- a/board/ge/bx50v3/bx50v3.c +++ b/board/ge/bx50v3/bx50v3.c @@ -804,6 +804,9 @@ int board_late_init(void) add_board_boot_modes(board_boot_modes); #endif + if (is_b850v3()) + env_set("videoargs", "video=DP-1:1024x768@60 video=HDMI-A-1:1024x768@60"); + /* board specific pmic init */ pmic_init(); diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 44c92f9d480b..ac54485080ef 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -15,7 +15,6 @@ #include <asm/arch/imx-regs.h> #include <asm/mach-imx/gpio.h> -#define BX50V3_BOOTARGS_EXTRA #if defined(CONFIG_TARGET_GE_B450V3) #define CONFIG_BOARD_NAME "General Electric B450v3" #elif defined(CONFIG_TARGET_GE_B650V3) @@ -23,8 +22,6 @@ #elif defined(CONFIG_TARGET_GE_B850V3) #define CONFIG_BOARD_NAME "General Electric B850v3" #undef BX50V3_BOOTARGS_EXTRA -#define BX50V3_BOOTARGS_EXTRA "video=DP-1:1024x768@60 " \ - "video=HDMI-A-1:1024x768@60 " #else #define CONFIG_BOARD_NAME "General Electric BA16 Generic" #endif @@ -114,7 +111,7 @@ "ro rootwait cma=128M " \ "bootcause=${bootcause} " \ "${quiet} console=${console} ${rtc_status} " \ - BX50V3_BOOTARGS_EXTRA "\0" \ + "${videoargs}" "\0" \ "doquiet=" \ "if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \ "then setenv quiet; fi\0" \ -- 2.17.0 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
