From: Ian Ray <[email protected]>
B{46}50v3s have an internal LCD that needs to be configured,
in comparison with B850v3 which has only external displays.
Use VPD instead of `CONFIG_TARGET_GE_B{4,6,8}50V3' compile-time
checks to correct initialize video based on the monitor type.
Signed-off-by: Ian Ray <[email protected]>
Signed-off-by: Nandor Han <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
---
board/ge/bx50v3/bx50v3.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index c988043a137f..b969d6255808 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -367,13 +367,14 @@ int board_cfb_skip(void)
return 0;
}
-static int detect_lcd(struct display_info_t const *dev)
+static int is_b850v3(void)
{
- if (IS_ENABLED(CONFIG_TARGET_GE_B450V3) ||
- IS_ENABLED(CONFIG_TARGET_GE_B650V3))
- return 1;
+ return confidx == 3;
+}
- return 0;
+static int detect_lcd(struct display_info_t const *dev)
+{
+ return !is_b850v3();
}
struct display_info_t const displays[] = {{
@@ -683,7 +684,7 @@ int board_early_init_f(void)
setup_iomux_uart();
#if defined(CONFIG_VIDEO_IPUV3)
- if (IS_ENABLED(CONFIG_TARGET_GE_B850V3))
+ if (is_b850v3())
/* Set LDB clock to Video PLL */
select_ldb_di_clock_source(MXC_PLL5_CLK);
else
@@ -721,7 +722,7 @@ int board_init(void)
gpio_direction_output(SUS_S3_OUT, 1);
gpio_direction_output(WIFI_EN, 1);
#if defined(CONFIG_VIDEO_IPUV3)
- if (IS_ENABLED(CONFIG_TARGET_GE_B850V3))
+ if (is_b850v3())
setup_display_b850v3();
else
setup_display_bx50v3();
--
2.17.0
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
