On 04/30/2018 06:02 PM, Michal Simek wrote: > Hi Tom, > > On 19.4.2018 09:07, Siva Durga Prasad Paladugu wrote: >> This patch series is meant to add SD3.0 support for ZynqMP >> platform. >> The first five patches in the series mostly setting up >> things in sdhci layer to support SD3.0 , the sixth patch >> is to add SD3.0 support for ZynqMP platform and the last >> patch is to enable this support for ZynqMP zcu102 rev1.0 >> eval board. >> >> Siva Durga Prasad Paladugu (7): >> mmc: sdhci: Add support for disabling clock >> mmc: sdhci: Handle execute tuning command in sdhci_send_command >> sdhci: Add new sdhci ops for platform specific tuning and delays >> mmc: sdhci: Invoke platform specific tuning and delay routines >> mmc : sdhci: Read capabilities register1 and update host caps >> mmc: zynq_sdhci: Add support for SD3.0 >> zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board >> >> board/xilinx/zynqmp/Makefile | 2 + >> board/xilinx/zynqmp/tap_delays.c | 229 >> +++++++++++++++++++++++++ >> configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 2 + >> drivers/mmc/sdhci.c | 63 ++++++- >> drivers/mmc/zynq_sdhci.c | 231 >> +++++++++++++++++++++++++- >> include/sdhci.h | 8 + >> include/zynqmp_tap_delay.h | 20 +++ >> 7 files changed, 547 insertions(+), 8 deletions(-) >> create mode 100644 board/xilinx/zynqmp/tap_delays.c >> create mode 100644 include/zynqmp_tap_delay.h >> > > It looks like that Jaehoon is out or busy with something else. Can you > please recommend someone to take a look at these patches? Definitely > feel free to look at it self.
Sorry. First, I checked the patches that delegate to me on patchwork. So I missed this patchset. I will check this on Today. Best Regards, Jaehoon Chung > > Thanks, > Michal > > > _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
