Hi Jaehoon, On 2.5.2018 04:05, Jaehoon Chung wrote: > On 04/30/2018 06:02 PM, Michal Simek wrote: >> Hi Tom, >> >> On 19.4.2018 09:07, Siva Durga Prasad Paladugu wrote: >>> This patch series is meant to add SD3.0 support for ZynqMP >>> platform. >>> The first five patches in the series mostly setting up >>> things in sdhci layer to support SD3.0 , the sixth patch >>> is to add SD3.0 support for ZynqMP platform and the last >>> patch is to enable this support for ZynqMP zcu102 rev1.0 >>> eval board. >>> >>> Siva Durga Prasad Paladugu (7): >>> mmc: sdhci: Add support for disabling clock >>> mmc: sdhci: Handle execute tuning command in sdhci_send_command >>> sdhci: Add new sdhci ops for platform specific tuning and delays >>> mmc: sdhci: Invoke platform specific tuning and delay routines >>> mmc : sdhci: Read capabilities register1 and update host caps >>> mmc: zynq_sdhci: Add support for SD3.0 >>> zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board >>> >>> board/xilinx/zynqmp/Makefile | 2 + >>> board/xilinx/zynqmp/tap_delays.c | 229 >>> +++++++++++++++++++++++++ >>> configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 2 + >>> drivers/mmc/sdhci.c | 63 ++++++- >>> drivers/mmc/zynq_sdhci.c | 231 >>> +++++++++++++++++++++++++- >>> include/sdhci.h | 8 + >>> include/zynqmp_tap_delay.h | 20 +++ >>> 7 files changed, 547 insertions(+), 8 deletions(-) >>> create mode 100644 board/xilinx/zynqmp/tap_delays.c >>> create mode 100644 include/zynqmp_tap_delay.h >>> >> >> It looks like that Jaehoon is out or busy with something else. Can you >> please recommend someone to take a look at these patches? Definitely >> feel free to look at it self. > > Sorry. First, I checked the patches that delegate to me on patchwork. > So I missed this patchset. I will check this on Today.
It looks like that Today wasn't really Today. Anyway giving you one more day and then will apply it via my tree. Thanks, Michal _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
