On Thu, Jun 07, 2018 at 07:23:39PM -0700, Vasily Khoruzhick wrote:
> We can use compatibles instead.
>
> Signed-off-by: Vasily Khoruzhick <anars...@gmail.com>
> ---
> v3: use ehci_sunxi_cfg instead of id
>
> drivers/usb/host/ehci-sunxi.c | 83 ++++++++++++++++++++++++++---------
> 1 file changed, 63 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
> index 360efc9116..35fbe03331 100644
> --- a/drivers/usb/host/ehci-sunxi.c
> +++ b/drivers/usb/host/ehci-sunxi.c
> @@ -22,11 +22,17 @@
> #define AHB_CLK_DIST 1
> #endif
>
> +struct ehci_sunxi_cfg {
> + bool has_reset;
> + u32 extra_ahb_gate_mask;
> +};
> +
> struct ehci_sunxi_priv {
> struct ehci_ctrl ehci;
> struct sunxi_ccm_reg *ccm;
> int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
Ideally this should be moved to the ehci_sunxi_cfg (and this is true
for OHCI as well) function for consistency, but that can be done in a
subsequent patch.
It looks good otherwise, thanks!
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
