Hi Bharat, On 09.07.2018 15:06, Bharat Bhushan wrote: > > >> -----Original Message----- >> From: Laurentiu Tudor [mailto:[email protected]] >> Sent: Wednesday, July 4, 2018 7:44 PM >> To: York Sun <[email protected]>; Prabhakar Kushwaha >> <[email protected]>; [email protected] >> Cc: Bharat Bhushan <[email protected]>; Laurentiu Tudor >> <[email protected]> >> Subject: [PATCH v3 3/7] misc: fsl_portals: setup QMAN_BAR{E} also on ARM >> platforms >> >> QMAN_BAR{E} register setup was disabled on ARM platforms, however the >> register does need to be set. Enable the code also on ARMs and fix the >> CONFIG_SYS_QMAN_MEM_PHYS define to the correct value so that the >> newly >> enabled code works. >> >> Signed-off-by: Laurentiu Tudor <[email protected]> >> --- >> arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h | 3 +-- >> drivers/misc/fsl_portals.c | 2 -- >> 2 files changed, 1 insertion(+), 4 deletions(-) >> >> diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h >> b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h >> index 644a16dd30..d22ec70aa5 100644 >> --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h >> +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h >> @@ -57,8 +57,7 @@ >> #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0x3E80 >> #define CONFIG_SYS_QMAN_NUM_PORTALS 10 >> #define CONFIG_SYS_QMAN_MEM_BASE 0x500000000 >> -#define CONFIG_SYS_QMAN_MEM_PHYS (0xf00000000ull + \ >> - >> CONFIG_SYS_QMAN_MEM_BASE) >> +#define CONFIG_SYS_QMAN_MEM_PHYS >> CONFIG_SYS_QMAN_MEM_BASE > > Are you sure that these changes works for PowerPC ? >
Can't imagine how it could happen. immap_lsch2.h is a ls104xa specific file. --- Thanks & Best Regards, Laurentiu _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
