From: Yuantian Tang <[email protected]> One ls1012a, there is one SATA 3.0 advanced host controller interface which is a high-performance SATA solution that delivers comprehensive and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA capabilities, in accordance with the serial ATA revision 3.0 of Serial ATA International Organization. Add sata node to support this feature.
Signed-off-by: Tang Yuantian <[email protected]> --- v3: - no changes v2: - add qds and 2g5rdb board support arch/arm/dts/fsl-ls1012a-2g5rdb.dts | 4 ++++ arch/arm/dts/fsl-ls1012a-qds.dtsi | 4 ++++ arch/arm/dts/fsl-ls1012a-rdb.dtsi | 4 ++++ arch/arm/dts/fsl-ls1012a.dtsi | 8 ++++++++ 4 files changed, 20 insertions(+), 0 deletions(-) diff --git a/arch/arm/dts/fsl-ls1012a-2g5rdb.dts b/arch/arm/dts/fsl-ls1012a-2g5rdb.dts index db23cf8..cdd4ce4 100644 --- a/arch/arm/dts/fsl-ls1012a-2g5rdb.dts +++ b/arch/arm/dts/fsl-ls1012a-2g5rdb.dts @@ -40,3 +40,7 @@ &duart0 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1012a-qds.dtsi b/arch/arm/dts/fsl-ls1012a-qds.dtsi index d069b60..661af0e 100644 --- a/arch/arm/dts/fsl-ls1012a-qds.dtsi +++ b/arch/arm/dts/fsl-ls1012a-qds.dtsi @@ -125,3 +125,7 @@ status = "okay"; phy_type = "ulpi"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1012a-rdb.dtsi b/arch/arm/dts/fsl-ls1012a-rdb.dtsi index 201e5fa..757e2eb 100644 --- a/arch/arm/dts/fsl-ls1012a-rdb.dtsi +++ b/arch/arm/dts/fsl-ls1012a-rdb.dtsi @@ -34,3 +34,7 @@ &duart0 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1012a.dtsi b/arch/arm/dts/fsl-ls1012a.dtsi index be99076..f22cbf4 100644 --- a/arch/arm/dts/fsl-ls1012a.dtsi +++ b/arch/arm/dts/fsl-ls1012a.dtsi @@ -134,6 +134,14 @@ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; + sata: sata@3200000 { + compatible = "fsl,ls1012a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 69 4>; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + usb0: usb2@8600000 { compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; reg = <0x0 0x8600000 0x0 0x1000>; -- 1.7.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
