> -----Original Message-----
> From: Peng Fan
> Sent: 2018年7月26日 19:47
> To: [email protected]; [email protected]
> Cc: [email protected]; [email protected]; Peng Fan
> <[email protected]>
> Subject: [PATCH V2] drivers: regulator: fixed: add u-boot,off-on-delay-us
>
> Add u-boot,off-on-delay-us for fixed regulator.
>
> Depends on board design, the gpio regulator sometimes connects with a big
> capacitance. When need to off, then on the regulator, if there is no enough
> delay,
> the voltage does not drop to 0, so introduce this property to handle such
> case.
>
> Signed-off-by: Peng Fan <[email protected]>
> Reviewed-by: Simon Glass <[email protected]>
> Cc: Masahiro Yamada <[email protected]>
> ---
>
> V2:
> Moved device tree bindings to new directory.
> Simon, I keep you reviewed by tag. Thanks.
Sorry, this patchset should be V3 version.
Tom, should I resend a v3 out? Or you could apply this one?
Thanks,
Peng.
>
> doc/device-tree-bindings/regulator/fixed.txt | 1 +
> drivers/power/regulator/fixed.c | 6 ++++++
> 2 files changed, 7 insertions(+)
>
> diff --git a/doc/device-tree-bindings/regulator/fixed.txt
> b/doc/device-tree-bindings/regulator/fixed.txt
> index 5fd9033fea..453d2bef44 100644
> --- a/doc/device-tree-bindings/regulator/fixed.txt
> +++ b/doc/device-tree-bindings/regulator/fixed.txt
> @@ -11,6 +11,7 @@ Required properties:
> Optional properties:
> - gpio: GPIO to use for enable control
> - startup-delay-us: startup time in microseconds
> +- u-boot,off-on-delay-us: off delay time in microseconds
> - regulator constraints (binding info: regulator.txt)
> - enable-active-high: Polarity of GPIO is Active high. If this property
> is missing, the default assumed is Active low.
> diff --git a/drivers/power/regulator/fixed.c b/drivers/power/regulator/fixed.c
> index 0be5b7bd51..a99aa78310 100644
> --- a/drivers/power/regulator/fixed.c
> +++ b/drivers/power/regulator/fixed.c
> @@ -16,6 +16,7 @@
> struct fixed_regulator_platdata {
> struct gpio_desc gpio; /* GPIO for regulator enable control */
> unsigned int startup_delay_us;
> + unsigned int off_on_delay_us;
> };
>
> static int fixed_regulator_ofdata_to_platdata(struct udevice *dev) @@ -50,6
> +51,8 @@ static int fixed_regulator_ofdata_to_platdata(struct udevice *dev)
> /* Get optional ramp up delay */
> dev_pdata->startup_delay_us = dev_read_u32_default(dev,
> "startup-delay-us", 0);
> + dev_pdata->off_on_delay_us =
> + dev_read_u32_default(dev, "u-boot,off-on-delay-us", 0);
>
> return 0;
> }
> @@ -123,6 +126,9 @@ static int fixed_regulator_set_enable(struct udevice
> *dev, bool enable)
> udelay(dev_pdata->startup_delay_us);
> debug("%s: done\n", __func__);
>
> + if (!enable && dev_pdata->off_on_delay_us)
> + udelay(dev_pdata->off_on_delay_us);
> +
> return 0;
> }
>
> --
> 2.14.1
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
