Marek Vasut <[email protected]> schrieb am Mo., 13. Aug. 2018, 15:29: > On 08/13/2018 09:33 AM, Simon Goldschmidt wrote: > > gd->env_addr points to pre-relocation address even after > > relocation. This leads to an abort in env_callback_init > > when loading the environment. > > > > Fix this by enabling CONFIG_SYS_EXTRA_ENV_RELOC. > > Doesn't this apply to gen10 too ? >
Ehrm, I really don't know. As I don't know gen10, I didn't want to break it. I could try to check the sources, but without knowing the architecture details and having a board to test, I might break things... > > Signed-off-by: Simon Goldschmidt <[email protected]> > > --- > > > > Changes in v3: this patch is new in v3 > > Changes in v2: None > > > > include/configs/socfpga_common.h | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/include/configs/socfpga_common.h > b/include/configs/socfpga_common.h > > index 8ebf6b85fe..2fb207c86a 100644 > > --- a/include/configs/socfpga_common.h > > +++ b/include/configs/socfpga_common.h > > @@ -284,6 +284,14 @@ unsigned int cm_get_qspi_controller_clk_hz(void); > > #define CONFIG_SPL_STACK CONFIG_SYS_SPL_MALLOC_START > > #endif > > > > +#ifdef CONFIG_TARGET_SOCFPGA_GEN5 > > +/* When U-Boot is started from FPGA, prevent gd->env_addr to point into > > + * FPGA OnChip RAM after relocation > > + */ > > +#define CONFIG_SYS_EXTRA_ENV_RELOC > > +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start > of monitor */ > > +#endif > > + > > /* Extra Environment */ > > #ifndef CONFIG_SPL_BUILD > > > > > > > -- > Best regards, > Marek Vasut > _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
