CLK and DM_RESET drivers are now available for most of the Allwinner platforms, so enable in mach-sunxi/Kconfig
Enabling CLK will select DM_RESET by default. Tested-by: Jagan Teki <[email protected]> Signed-off-by: Jagan Teki <[email protected]> --- arch/arm/mach-sunxi/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 686f38fec4..b9575c6b92 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -132,6 +132,7 @@ endif config MACH_SUNXI_H3_H5 bool + select CLK select DM_I2C select PHY_SUN4I_USB select SUNXI_DE2 @@ -147,6 +148,7 @@ choice config MACH_SUN4I bool "sun4i (Allwinner A10)" select CPU_V7A + select CLK select ARM_CORTEX_CPU_IS_UP select DM_MMC if MMC select DM_SCSI if SCSI @@ -158,6 +160,7 @@ config MACH_SUN4I config MACH_SUN5I bool "sun5i (Allwinner A13)" select CPU_V7A + select CLK select ARM_CORTEX_CPU_IS_UP select DRAM_SUN4I select PHY_SUN4I_USB @@ -171,6 +174,7 @@ config MACH_SUN6I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select CLK select DRAM_SUN6I select PHY_SUN4I_USB select SUN6I_P2WI @@ -185,6 +189,7 @@ config MACH_SUN7I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select CLK select DRAM_SUN4I select PHY_SUN4I_USB select SUNXI_GEN_SUN4I @@ -197,6 +202,7 @@ config MACH_SUN8I_A23 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select CLK select DRAM_SUN8I_A23 select PHY_SUN4I_USB select SUNXI_GEN_SUN6I @@ -210,6 +216,7 @@ config MACH_SUN8I_A33 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select CLK select DRAM_SUN8I_A33 select PHY_SUN4I_USB select SUNXI_GEN_SUN6I @@ -220,6 +227,7 @@ config MACH_SUN8I_A33 config MACH_SUN8I_A83T bool "sun8i (Allwinner A83T)" select CPU_V7A + select CLK select DRAM_SUN8I_A83T select PHY_SUN4I_USB select SUNXI_GEN_SUN6I @@ -231,6 +239,7 @@ config MACH_SUN8I_H3 select CPU_V7A select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT + select CLK select ARCH_SUPPORT_PSCI select MACH_SUNXI_H3_H5 select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT @@ -241,6 +250,7 @@ config MACH_SUN8I_R40 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select CLK select SUNXI_GEN_SUN6I select SUPPORT_SPL select SUNXI_DRAM_DW @@ -252,6 +262,7 @@ config MACH_SUN8I_V3S select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select CLK select SUNXI_GEN_SUN6I select SUNXI_DRAM_DW select SUNXI_DRAM_DW_16BIT @@ -270,6 +281,7 @@ config MACH_SUN9I config MACH_SUN50I bool "sun50i (Allwinner A64)" select ARM64 + select CLK select DM_I2C select PHY_SUN4I_USB select SUNXI_DE2 -- 2.18.0.321.gffc6fa0e3 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
