DTC issues a warning because #address-cells and #size-cells properties are not set in the mdio node. Also add ethernet1 alias. Also add RTC node. Also fix USB3 regulator startup delay time. Also fix PCI Express SERDES speed to 5 GHz (this is only cosmetic, the speed value is not used byt the comphy driver for PCI Express, but should be 5 GHz nonetheless).
Signed-off-by: Marek Behún <[email protected]> --- arch/arm/dts/armada-3720-turris-mox.dts | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts index 9c96dd39a9..2a71da21bf 100644 --- a/arch/arm/dts/armada-3720-turris-mox.dts +++ b/arch/arm/dts/armada-3720-turris-mox.dts @@ -24,6 +24,7 @@ aliases { ethernet0 = ð0; + ethernet1 = ð1; i2c0 = &i2c0; spi0 = &spi0; }; @@ -38,12 +39,16 @@ regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + startup-delay-us = <2000000>; shutdown-delay-us = <1000000>; gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>; regulator-boot-on; }; mdio { + #address-cells = <1>; + #size-cells = <0>; + eth_phy1: ethernet-phy@1 { reg = <1>; }; @@ -59,7 +64,7 @@ phy1 { phy-type = <PHY_TYPE_PEX0>; - phy-speed = <PHY_SPEED_2_5G>; + phy-speed = <PHY_SPEED_5G>; }; phy2 { @@ -80,6 +85,11 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; status = "okay"; + + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; }; &sdhci1 { -- 2.18.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
