Re: [U-Boot] [PATCH u-boot-marvell v3 04/10] arch/arm/dts: Fix Turris Mox device tree

[Stefan Roese]

On 20.11.18 13:04, Marek Behún wrote:

DTC issues a warning because #address-cells and #size-cells properties
are not set in the mdio node.
Also add ethernet1 alias.
Also add RTC node.
Also fix USB3 regulator startup delay time.
Also fix PCI Express SERDES speed to 5 GHz (this is only cosmetic, the
speed value is not used byt the comphy driver for PCI Express, but
should be 5 GHz nonetheless).

Signed-off-by: Marek Behún <marek.be...@nic.cz>

Reviewed-by: Stefan Roese <s...@denx.de>

Thanks,
Stefan

---
  arch/arm/dts/armada-3720-turris-mox.dts | 12 +++++++++++-
  1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/armada-3720-turris-mox.dts 
b/arch/arm/dts/armada-3720-turris-mox.dts
index 9c96dd39a9..2a71da21bf 100644
--- a/arch/arm/dts/armada-3720-turris-mox.dts
+++ b/arch/arm/dts/armada-3720-turris-mox.dts
@@ -24,6 +24,7 @@

aliases {

                ethernet0 = &eth0;
+               ethernet1 = &eth1;
                i2c0 = &i2c0;
                spi0 = &spi0;
        };
@@ -38,12 +39,16 @@
                regulator-name = "usb3-vbus";
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
+               startup-delay-us = <2000000>;
                shutdown-delay-us = <1000000>;
                gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
                regulator-boot-on;
        };

mdio {

+               #address-cells = <1>;
+               #size-cells = <0>;
+
                eth_phy1: ethernet-phy@1 {
                        reg = <1>;
                };
@@ -59,7 +64,7 @@

phy1 {

                phy-type = <PHY_TYPE_PEX0>;
-               phy-speed = <PHY_SPEED_2_5G>;
+               phy-speed = <PHY_SPEED_5G>;
        };

phy2 {

@@ -80,6 +85,11 @@
        pinctrl-names = "default";
        pinctrl-0 = <&i2c1_pins>;
        status = "okay";
+
+       rtc@6f {
+               compatible = "microchip,mcp7941x";
+               reg = <0x6f>;
+       };
  };

&sdhci1 {

Viele Grüße,
Stefan

--
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot