When a micro SD card is inserted in the PDU001 card cage, the card
detection switch is opened and the corresponding GPIO input is driven
by a pull-up. Hence change the active level of the card detection
input from low to high.
Signed-off-by: Felix Brack <f...@ltec.ch>
---
arch/arm/dts/am335x-pdu001.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/dts/am335x-pdu001.dts b/arch/arm/dts/am335x-pdu001.dts
index 121e2c6207..3a5e952663 100644
--- a/arch/arm/dts/am335x-pdu001.dts
+++ b/arch/arm/dts/am335x-pdu001.dts
@@ -576,7 +576,7 @@
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
- cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
};
&sham {
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
