On 29.11.2018 16:25, Tom Rini wrote: > On Thu, Nov 29, 2018 at 01:45:06PM +0100, Felix Brack wrote: > >> When a micro SD card is inserted in the PDU001 card cage, the card >> detection switch is opened and the corresponding GPIO input is driven >> by a pull-up. Hence change the active level of the card detection >> input from low to high. >> >> Signed-off-by: Felix Brack <[email protected]> >> --- >> >> arch/arm/dts/am335x-pdu001.dts | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm/dts/am335x-pdu001.dts b/arch/arm/dts/am335x-pdu001.dts >> index 121e2c6207..3a5e952663 100644 >> --- a/arch/arm/dts/am335x-pdu001.dts >> +++ b/arch/arm/dts/am335x-pdu001.dts >> @@ -576,7 +576,7 @@ >> bus-width = <4>; >> pinctrl-names = "default"; >> pinctrl-0 = <&mmc2_pins>; >> - cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; >> + cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; >> }; >> >> &sham { > > Is this in upstream Linux as well? If so what tag/hash? Thanks! > Not yet. I will send the Linux patch within a few days. The fix appears for U-Boot first as it is required for the upcoming patch that enables CONFIG_BLK and CONFIG_DM_MMC for this board.
regards, Felix _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
