Hi, Any one get any idea about below error? I'm using evb-rk3229_defconfig and gcc-linaro-6.3.1-2017.05.
LD u-boot fs/built-in.o: In function `set_contents': /home/kever/src/u-boot/fs/fat/fat_write.c:831: undefined reference to `__aeabi_ldivmod' /home/kever/src/prebuilts/gcc/linux-x86/arm/gcc-linaro-6.3.1-2017.05-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-ld.bfd: BFD (Linaro_Binutils-2017.05) 2.27.0.20161019 assertion fail /home/tcwg-buildslave/workspace/tcwg-make-release/builder_arch/amd64/label/tcwg-x86_64-build/target/arm-linux-gnueabihf/snapshots/binutils-gdb.git~linaro-local~linaro_binutils-2_27-branch/bfd/elf32-arm.c:8784 make: *** [u-boot] Error 1 Thanks, - Kever On 12/04/2018 12:51 PM, Tom Rini wrote: > Hey all, > > So it's release day and I've put up v2019.01-rc1. The merge window is > now closed and I've updated git and the tarballs are also up now. > > Before I get into other comments, I need to talk about DM related > deadlines. You may have seen a big series go out and say things related > to CONFIG_BLK need to be converted _right_now_ or be removed. This was > a tad overzealous, and we had problems with prior notifications not > being noisy enough. So, good news, we have some build related warnings > now. And more good news, we've pushed some deadlines out until at least > v2019.04 or v2019.07. But the bad news is that those are going to be > some rather firm deadlines. So if you see a build warning, please do > look into fixing it, or asking for some help in fixing it as not all > issues are board-specific and we have some SoC-wide drivers that need > fixing. But we need to update them. > > Looking over my patchwork queue I see a few things I do want to grab but > given the time a CI cycle takes and that due to the RTC issue (thanks > again Heinrich for the fix!) I didn't get as much applied over the > weekend as I wanted, I see the following as things I want to pull in > over the next few days, even with -rc1 out: > https://patchwork.ozlabs.org/project/uboot/list/?series=78259 > https://patchwork.ozlabs.org/project/uboot/list/?series=78360 > https://patchwork.ozlabs.org/project/uboot/list/?series=78668 > > And I will be doing that in the next day or two. > > Looking over git log --merges v2018.11.. I can make out the following > for a changelog: > - ftgmac100 improvements > - TI: CPSW improvements > - VSC8584 PHY support > - Add MT7628 ethernet driver > - Various sunxi, socfpga, riscv improvements > - virtio implementation and supporting patches > - DM_FLAG_PRE_RELOC fixes > - regmap improvements > - Various improvements in sandbox and buildman > - Initial bcm968580xref, am65x_evm_r5 support > - lpc32xx, omap3_logic/am3517_evm updates > - pinctrl command > - fs_loader available for SPL > - MIPS: fix long-standing issue with linking of standalone programs > - MIPS: MT76xx: add GPIO and WDT drivers > - MIPS: MT76xx: various fixes and updates to gardena-smart-gateway board > - MIPS: MT76xx: various fixes and updates to linkit-smart-7688 board > - adc enhancements > - Clearfog GT-8K support added by Baruch / Raheeb > - Minor cleanup to db-88f6820 from Chris > - Bring in the series from Simon for SPL logging support and bloblist > - chiliboard updates > - misc TI platform updates > - chiliboard updates > - Introduce CONFIG_SPL_DM_USB > - Add MediaTek support > - mmc: meson-gx: Add AXG compatible > - net: designware: add meson meson compatibles > - Amlogic Meson cleanup for AXG SoC support > - meson: Add regmap support for clock driver and sync DT with 4.19 > - Some Kirkwood boards converted to DM_SPI by Chris > - New Armada-385 SoC revision printed by Chris > - Ethernet enable on mcbin by Baruch > - Support 2 DRAM banks on Armada-8k boards by Baruch > - Convert TPM fully to DM > - Add a 'make qcheck' target for faster testing > - Rockchip improvements: > - RK3188 USB-UART functionality > - errors triggering a hard-stop in SPL on the RK3399 are reported > - Rockchip RV1108 (SoC) support > - MicroCrystal RV3029 (RTC) DM driver > - Rockchip fixes: > - RK3188 early UART setup > - limit SD-card frequency to 40MHz on the RK3399-Q7 > - MIPI fixes > - RK3399 CPUB clock initialisation > - ARC: > - Try to match found HW features to known ARC core templates > - Print CPU frequency for all ARC boards > - Add more board-specific info > - microblaze: > - Use default functions for memory decoding > - Showing model from DT > - zynq: > - Fix spi flash DTs > - Fix zynq_help_text with CONFIG_SYS_LONGHELP > - Tune cse/mini configurations > - Enabling cse/mini testing with current targets > - zynqmp: > - Enable gzip SPL support > - Fix chip detection logic > - Tune mini configurations > - DT fixes(spi-flash, models, clocks, etc) > - Add support for OF_SEPARATE configurations > - Enabling mini testing with current targets > - Add mini mtest configuration > - Some minor config setting > - Raspberry Pi: 3A+, Allow 2nd MMC device, Allow UUID to find filesystem > - UEFI: > - Make PE images more standards compliant > - Improve sandbox support > - Improve correctness > - Fix RISC-V execution on virt model > - Honor board defined top of ram (fixes a few boards) > - Imply DM USB access when distro boot is available > - Code cleanups > > And I'm glad a lot of custodians have taken the time to put a brief > summary of what's in a pull request. I've even switched to making my > own branches and merging those in rather than directly applying to > master to have more information available when writing these summaries. > I'd like to ask that everyone please do this moving forward. Otherwise > you risk me missummarizing your content. > > I will follow the usual rule of an -rc every other Monday > and we're looking at release on January 7th, 2019. > > Thanks all! > > > > _______________________________________________ > U-Boot mailing list > [email protected] > https://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
