On 12/04/2018 04:06 PM, Kever Yang wrote: > Hi, > > Any one get any idea about below error? I'm using > evb-rk3229_defconfig and gcc-linaro-6.3.1-2017.05. One more information missing, I can build success with default config, but fail with DEBUG option enable in header file like this: +++ b/include/configs/rk322x_common.h @@ -34,7 +34,7 @@ #ifndef CONFIG_SPL_BUILD /* usb otg */ - +#define DEBUG
> > LD u-boot > fs/built-in.o: In function `set_contents': > /home/kever/src/u-boot/fs/fat/fat_write.c:831: undefined reference to > `__aeabi_ldivmod' > /home/kever/src/prebuilts/gcc/linux-x86/arm/gcc-linaro-6.3.1-2017.05-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-ld.bfd: > BFD (Linaro_Binutils-2017.05) 2.27.0.20161019 assertion fail > /home/tcwg-buildslave/workspace/tcwg-make-release/builder_arch/amd64/label/tcwg-x86_64-build/target/arm-linux-gnueabihf/snapshots/binutils-gdb.git~linaro-local~linaro_binutils-2_27-branch/bfd/elf32-arm.c:8784 > make: *** [u-boot] Error 1 > > Thanks, > - Kever > On 12/04/2018 12:51 PM, Tom Rini wrote: >> Hey all, >> >> So it's release day and I've put up v2019.01-rc1. The merge window is >> now closed and I've updated git and the tarballs are also up now. >> >> Before I get into other comments, I need to talk about DM related >> deadlines. You may have seen a big series go out and say things related >> to CONFIG_BLK need to be converted _right_now_ or be removed. This was >> a tad overzealous, and we had problems with prior notifications not >> being noisy enough. So, good news, we have some build related warnings >> now. And more good news, we've pushed some deadlines out until at least >> v2019.04 or v2019.07. But the bad news is that those are going to be >> some rather firm deadlines. So if you see a build warning, please do >> look into fixing it, or asking for some help in fixing it as not all >> issues are board-specific and we have some SoC-wide drivers that need >> fixing. But we need to update them. >> >> Looking over my patchwork queue I see a few things I do want to grab but >> given the time a CI cycle takes and that due to the RTC issue (thanks >> again Heinrich for the fix!) I didn't get as much applied over the >> weekend as I wanted, I see the following as things I want to pull in >> over the next few days, even with -rc1 out: >> https://patchwork.ozlabs.org/project/uboot/list/?series=78259 >> https://patchwork.ozlabs.org/project/uboot/list/?series=78360 >> https://patchwork.ozlabs.org/project/uboot/list/?series=78668 >> >> And I will be doing that in the next day or two. >> >> Looking over git log --merges v2018.11.. I can make out the following >> for a changelog: >> - ftgmac100 improvements >> - TI: CPSW improvements >> - VSC8584 PHY support >> - Add MT7628 ethernet driver >> - Various sunxi, socfpga, riscv improvements >> - virtio implementation and supporting patches >> - DM_FLAG_PRE_RELOC fixes >> - regmap improvements >> - Various improvements in sandbox and buildman >> - Initial bcm968580xref, am65x_evm_r5 support >> - lpc32xx, omap3_logic/am3517_evm updates >> - pinctrl command >> - fs_loader available for SPL >> - MIPS: fix long-standing issue with linking of standalone programs >> - MIPS: MT76xx: add GPIO and WDT drivers >> - MIPS: MT76xx: various fixes and updates to gardena-smart-gateway board >> - MIPS: MT76xx: various fixes and updates to linkit-smart-7688 board >> - adc enhancements >> - Clearfog GT-8K support added by Baruch / Raheeb >> - Minor cleanup to db-88f6820 from Chris >> - Bring in the series from Simon for SPL logging support and bloblist >> - chiliboard updates >> - misc TI platform updates >> - chiliboard updates >> - Introduce CONFIG_SPL_DM_USB >> - Add MediaTek support >> - mmc: meson-gx: Add AXG compatible >> - net: designware: add meson meson compatibles >> - Amlogic Meson cleanup for AXG SoC support >> - meson: Add regmap support for clock driver and sync DT with 4.19 >> - Some Kirkwood boards converted to DM_SPI by Chris >> - New Armada-385 SoC revision printed by Chris >> - Ethernet enable on mcbin by Baruch >> - Support 2 DRAM banks on Armada-8k boards by Baruch >> - Convert TPM fully to DM >> - Add a 'make qcheck' target for faster testing >> - Rockchip improvements: >> - RK3188 USB-UART functionality >> - errors triggering a hard-stop in SPL on the RK3399 are reported >> - Rockchip RV1108 (SoC) support >> - MicroCrystal RV3029 (RTC) DM driver >> - Rockchip fixes: >> - RK3188 early UART setup >> - limit SD-card frequency to 40MHz on the RK3399-Q7 >> - MIPI fixes >> - RK3399 CPUB clock initialisation >> - ARC: >> - Try to match found HW features to known ARC core templates >> - Print CPU frequency for all ARC boards >> - Add more board-specific info >> - microblaze: >> - Use default functions for memory decoding >> - Showing model from DT >> - zynq: >> - Fix spi flash DTs >> - Fix zynq_help_text with CONFIG_SYS_LONGHELP >> - Tune cse/mini configurations >> - Enabling cse/mini testing with current targets >> - zynqmp: >> - Enable gzip SPL support >> - Fix chip detection logic >> - Tune mini configurations >> - DT fixes(spi-flash, models, clocks, etc) >> - Add support for OF_SEPARATE configurations >> - Enabling mini testing with current targets >> - Add mini mtest configuration >> - Some minor config setting >> - Raspberry Pi: 3A+, Allow 2nd MMC device, Allow UUID to find filesystem >> - UEFI: >> - Make PE images more standards compliant >> - Improve sandbox support >> - Improve correctness >> - Fix RISC-V execution on virt model >> - Honor board defined top of ram (fixes a few boards) >> - Imply DM USB access when distro boot is available >> - Code cleanups >> >> And I'm glad a lot of custodians have taken the time to put a brief >> summary of what's in a pull request. I've even switched to making my >> own branches and merging those in rather than directly applying to >> master to have more information available when writing these summaries. >> I'd like to ask that everyone please do this moving forward. Otherwise >> you risk me missummarizing your content. >> >> I will follow the usual rule of an -rc every other Monday >> and we're looking at release on January 7th, 2019. >> >> Thanks all! >> >> >> >> _______________________________________________ >> U-Boot mailing list >> [email protected] >> https://lists.denx.de/listinfo/u-boot > _______________________________________________ > U-Boot mailing list > [email protected] > https://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
