Hi Peng, > I did not meet this issue, my log as below, u-boot-nodtb.bin is generated > before the mkimage_fit_atf.sh being executed
I think this can probably only happen when running a parallel make. If I run it at -j12 I can trigger the build failure quite reliably with this error: ERROR: u-boot-nodtb.bin file NOT found Thanks, Chris Disclaimer: This email has been scanned for all known viruses by the MessageLabs Email Security System. The contents of this email (including any attachments) are intended for the use of the mail addressee(s) shown, hence is private and in addition may include commercially sensitive information. If you are not the intended recipient of this email any disclosure, copying, distribution or use of its contents is strictly prohibited. You should notify the sender immediately and then delete it (including any attachments) from your system. The information contained in or attached to this message may also be subject to the export control laws and regulations of the United Kingdom and the United States. This specifically includes, but is not limited to, the Arms Export Control Act (22 U.S.C. 2751-2794) and the International Traffic in Arms Regulation (22 C.F.R 120-130) as well as the Export Administration Act (50 U.S.C. App. 2401-2420), the Export Administration Regulation (15 C.F.R. 730-774) and the UK Export Control Act 2002. Please help out the environment by only printing this e-mail if absolutely necessary - Thank you. SEA is the brand name of Systems Engineering & Assessment Ltd (registered office: Beckington Castle, 17 Castle Corner, Beckington, Frome, Somerset, BA11 6TA, UK - company number 02302168). _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
