On Tue, Jan 15, 2019 at 11:07:23AM +0000, Abel Vesa wrote: > Some boards might need USB_STORAGE enabled in u-boot proper but not in SPL. > Make a separate config for SPL and keep the same depends on conditions but > for SPL. > > Signed-off-by: Abel Vesa <[email protected]> > --- > common/Makefile | 2 +- > configs/apalis_imx6_defconfig | 1 + > configs/colibri_imx6_defconfig | 1 + > configs/mx6sabresd_defconfig | 1 + > drivers/usb/Kconfig | 8 ++++++++ > 5 files changed, 12 insertions(+), 1 deletion(-)
The root problem here, as I discovered today digging in another patch is that in essence CONFIG_SPL_USB_SUPPORT is mis-named and should be CONFIG_SPL_USB_STORAGE and all cases in Makefiles of obj-$(CONFIG_USB_STORAGE) should be obj-$(CONFIG_$(SPL_)USB_STORAGE) and common/spl/spl_usb.c have its ifdef's cleaned slightly as that code cannot function without CONFIG_USB_STORAGE set (stor_dev will be NULL and that _will_ oops later on). -- Tom
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
