Hi Peng, Em qua, 16 de jan de 2019 às 23:33, Peng Fan <[email protected]> escreveu: > > Hi Breno, > > > -----Original Message----- > > From: Breno Matheus Lima [mailto:[email protected]] > > Sent: 2019年1月17日 9:04 > > To: Peng Fan <[email protected]>; Breno Matheus Lima > > <[email protected]> > > Cc: Fabio Estevam <[email protected]>; Fabio Estevam > > <[email protected]>; U-Boot-Denx <[email protected]> > > Subject: Problems to boot i.MX8QXP EVK board > > > > Hi Peng, > > > > I'm not being able to boot U-Boot v2019.01 on my i.MX8QXP B0 MEK board > > by following README file (board/freescale/imx8qxp_mek/README). > > > > After reverting commit f7e475db4011("tools: imx8image: set dcd_skip to > > true") everything seems to be working fine. > > Are you using A0 or B0 chip? A0 chip is no being supported anymore. >
I'm using i.MX8QXP B0: U-Boot 2019.01-00001-gc94b5e99a6 (Jan 16 2019 - 22:52:33 -0200) CPU: NXP i.MX8QXP RevB A35 at 147228 MHz Model: Freescale i.MX8QXP MEK Board: iMX8QXP MEK Build: SCFW 3301c1a9 Boot: SD1 DRAM: 3 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: eth-1: ethernet@5b040000 Hit any key to stop autoboot: 0 => Thanks, Breno Lima _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
