> -----Original Message----- > From: Breno Matheus Lima [mailto:[email protected]] > Sent: 2019年1月17日 9:42 > To: Peng Fan <[email protected]> > Cc: Breno Matheus Lima <[email protected]>; Fabio Estevam > <[email protected]>; Fabio Estevam <[email protected]>; > U-Boot-Denx <[email protected]> > Subject: Re: Problems to boot i.MX8QXP EVK board > > Hi Peng, > > Em qua, 16 de jan de 2019 às 23:33, Peng Fan <[email protected]> > escreveu: > > > > Hi Breno, > > > > > -----Original Message----- > > > From: Breno Matheus Lima [mailto:[email protected]] > > > Sent: 2019年1月17日 9:04 > > > To: Peng Fan <[email protected]>; Breno Matheus Lima > > > <[email protected]> > > > Cc: Fabio Estevam <[email protected]>; Fabio Estevam > > > <[email protected]>; U-Boot-Denx <[email protected]> > > > Subject: Problems to boot i.MX8QXP EVK board > > > > > > Hi Peng, > > > > > > I'm not being able to boot U-Boot v2019.01 on my i.MX8QXP B0 MEK > > > board by following README file > (board/freescale/imx8qxp_mek/README). > > > > > > After reverting commit f7e475db4011("tools: imx8image: set dcd_skip > > > to > > > true") everything seems to be working fine. > > > > Are you using A0 or B0 chip? A0 chip is no being supported anymore. > > > > I'm using i.MX8QXP B0:
Could you give a try using 4.14.78 GA release scfw/seco/atf + upstream uboot? There might be some change in scfw. Thanks, Peng. > > U-Boot 2019.01-00001-gc94b5e99a6 (Jan 16 2019 - 22:52:33 -0200) > > CPU: NXP i.MX8QXP RevB A35 at 147228 MHz > > Model: Freescale i.MX8QXP MEK > Board: iMX8QXP MEK > Build: SCFW 3301c1a9 > Boot: SD1 > DRAM: 3 GiB > MMC: FSL_SDHC: 0, FSL_SDHC: 1 > Loading Environment from MMC... *** Warning - bad CRC, using default > environment > > In: serial@5a060000 > Out: serial@5a060000 > Err: serial@5a060000 > Net: eth-1: ethernet@5b040000 > Hit any key to stop autoboot: 0 > => > > Thanks, > Breno Lima _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
