> -----Original Message----- > From: Fabio Estevam [mailto:feste...@gmail.com] > Sent: 2019年2月26日 20:36 > To: sba...@denx.de > Cc: dl-uboot-imx <uboot-...@nxp.com>; Peng Fan <peng....@nxp.com>; > Abel Vesa <abel.v...@nxp.com>; u-boot@lists.denx.de; Fabio Estevam > <feste...@gmail.com> > Subject: [PATCH 2/2] mx6sabreauto: README: Adjust the binary name after > DM conversion > > After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix > the README file accordingly. > > Signed-off-by: Fabio Estevam <feste...@gmail.com>
Acked-by: Peng Fan <peng....@nxp.com> > --- > board/freescale/mx6sabreauto/README | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/board/freescale/mx6sabreauto/README > b/board/freescale/mx6sabreauto/README > index e8c589b92a..4c0fda1a2d 100644 > --- a/board/freescale/mx6sabreauto/README > +++ b/board/freescale/mx6sabreauto/README > @@ -9,15 +9,15 @@ $ make mx6sabreauto_defconfig > > $ make > > -This will generate the SPL and u-boot.img binaries. > +This will generate the SPL and u-boot-dtb.img binaries. > > - Flash the SPL binary into the SD card: > > $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync > > -- Flash the u-boot.img binary into the SD card: > +- Flash the u-boot-dtb.img binary into the SD card: > > -$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync > +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync > > Booting via Falcon mode > ----------------------- > @@ -32,15 +32,15 @@ $ make mx6sabreauto_defconfig > > $ make > > -This will generate the SPL image called SPL and the u-boot.img. > +This will generate the SPL image called SPL and the u-boot-dtb.img. > > - Flash the SPL image into the SD card: > > $ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync > > -- Flash the u-boot.img image into the SD card: > +- Flash the u-boot-dtb.img image into the SD card: > > -$ sudo dd if=u-boot.img of=/dev/sdb bs=1K seek=69 && sync > +$ sudo dd if=u-boot-dtb.img of=/dev/sdb bs=1K seek=69 && sync > > Create a FAT16 boot partition to store uImage and the dtb file, then copy the > files there: > > -- > 2.17.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot