The driver will read the cache properties from the device tree file and set it up.
Signed-off-by: Dinh Nguyen <[email protected]> --- arch/arm/include/asm/pl310.h | 3 ++ drivers/misc/Kconfig | 7 +++ drivers/misc/Makefile | 1 + drivers/misc/cache-l2x0.c | 84 ++++++++++++++++++++++++++++++++++++ 4 files changed, 95 insertions(+) create mode 100644 drivers/misc/cache-l2x0.c diff --git a/arch/arm/include/asm/pl310.h b/arch/arm/include/asm/pl310.h index b83978b1cc..f69e9e45f8 100644 --- a/arch/arm/include/asm/pl310.h +++ b/arch/arm/include/asm/pl310.h @@ -18,6 +18,9 @@ #define L310_SHARED_ATT_OVERRIDE_ENABLE (1 << 22) #define L310_AUX_CTRL_DATA_PREFETCH_MASK (1 << 28) #define L310_AUX_CTRL_INST_PREFETCH_MASK (1 << 29) +#define L310_LATENCY_CTRL_SETUP(n) ((n) << 0) +#define L310_LATENCY_CTRL_RD(n) ((n) << 4) +#define L310_LATENCY_CTRL_WR(n) ((n) << 8) #define L2X0_CACHE_ID_PART_MASK (0xf << 6) #define L2X0_CACHE_ID_PART_L310 (3 << 6) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index d6e677fba8..c5c34b4dbb 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -13,6 +13,13 @@ config MISC set of generic read, write and ioctl methods may be used to access the device. +config L2X0_CACHE + bool "L2x0 Cache support" + depends on MISC + help + Select this to enable a PL310 L2 Cache driver. The driver will + configure the L2 Cache settings found in the device tree. + config ALTERA_SYSID bool "Altera Sysid support" depends on MISC diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 6bdf5054f4..ea726f4668 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_SANDBOX) += spltest_sandbox.o endif endif obj-$(CONFIG_ALI152X) += ali512x.o +obj-$(CONFIG_L2X0_CACHE) += cache-l2x0.o obj-$(CONFIG_ALTERA_SYSID) += altera_sysid.o obj-$(CONFIG_ATSHA204A) += atsha204a-i2c.o obj-$(CONFIG_CBMEM_CONSOLE) += cbmem_console.o diff --git a/drivers/misc/cache-l2x0.c b/drivers/misc/cache-l2x0.c new file mode 100644 index 0000000000..b31598b1cd --- /dev/null +++ b/drivers/misc/cache-l2x0.c @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2007 ARM Limited + * + * copied from Linux(arch/arm/mm/cache-l2x0.c + */ +#include <common.h> +#include <command.h> +#include <dm.h> + +#include <asm/io.h> +#include <asm/pl310.h> + +static void l2c310_of_parse(struct udevice *dev) +{ + u32 tag[3] = { 0, 0, 0 }; + u32 saved_reg, prefetch_i, prefetch_d; + bool shared_override; + struct pl310_regs *regs = (struct pl310_regs *)devfdt_get_addr(dev); + + /*Disable the L2 Cache */ + clrbits_le32(®s->pl310_ctrl, L2X0_CTRL_EN); + + dev_read_u32(dev, "prefetch-data", &prefetch_d); + dev_read_u32(dev, "prefetch-instr", &prefetch_i); + shared_override = dev_read_bool(dev, "arm,shared-override"); + + saved_reg = readl(®s->pl310_aux_ctrl); + if (prefetch_d) + saved_reg |= L310_AUX_CTRL_DATA_PREFETCH_MASK; + if (prefetch_i) + saved_reg |= L310_AUX_CTRL_INST_PREFETCH_MASK; + if (shared_override) + saved_reg |= L310_SHARED_ATT_OVERRIDE_ENABLE; + + writel(saved_reg, ®s->pl310_aux_ctrl); + + saved_reg = readl(®s->pl310_tag_latency_ctrl); + dev_read_u32_array(dev, "arm,tag-latency", tag, 3); + + saved_reg |= L310_LATENCY_CTRL_RD(tag[0] - 1) | + L310_LATENCY_CTRL_WR(tag[1] - 1) | + L310_LATENCY_CTRL_SETUP(tag[2] - 1); + + writel(saved_reg, ®s->pl310_tag_latency_ctrl); + + saved_reg = readl(®s->pl310_data_latency_ctrl); + dev_read_u32_array(dev, "arm,data-latency", tag, 3); + + saved_reg |= L310_LATENCY_CTRL_RD(tag[0] - 1) | + L310_LATENCY_CTRL_WR(tag[1] - 1) | + L310_LATENCY_CTRL_SETUP(tag[2] - 1); + + writel(saved_reg, ®s->pl310_data_latency_ctrl); + + /* Enable the L2 cache */ + setbits_le32(®s->pl310_ctrl, L2X0_CTRL_EN); +} + +static int l2x0_ofdata_to_platdata(struct udevice *dev) +{ + return 0; +} + +static int l2x0_probe(struct udevice *dev) +{ + l2c310_of_parse(dev); + return 0; +} + + +static const struct udevice_id l2x0_ids[] = { + { .compatible = "arm,pl310-cache" }, + {} +}; + +U_BOOT_DRIVER(pl310_cache) = { + .name = "pl310_cache", + .id = UCLASS_MISC, + .of_match = l2x0_ids, + .probe = l2x0_probe, + .ofdata_to_platdata = l2x0_ofdata_to_platdata, + .flags = DM_FLAG_PRE_RELOC, +}; -- 2.20.0 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
