Hello Marek, On 4/19/19 3:35 PM, Marek Vasut wrote: > On 4/19/19 3:18 PM, Parthiban Nallathambi wrote: > > Hi, > > [...] > >>>> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig >>>> index d29f1ca0b5..9336439340 100644 >>>> --- a/arch/arm/mach-omap2/Kconfig >>>> +++ b/arch/arm/mach-omap2/Kconfig >>>> @@ -186,6 +186,7 @@ source "board/ti/am43xx/Kconfig" >>>> source "board/ti/am335x/Kconfig" >>>> source "board/compulab/cm_t335/Kconfig" >>>> source "board/compulab/cm_t43/Kconfig" >>>> +source "board/phytec/phycore_pcl060/Kconfig" >>> >>> Here [1] it says the name of the SoM is PCM-060 , what is PCL-060 ? >>> >>> [1] >>> https://www.phytec.eu/product-eu/system-on-modules/phycore-am335x-download/ >>> [...] >> >> This differs only by the connector. PCM variants are pluggable and PCL >> variants >> are direct soliderable to the carrier board. >> >> Copied from [1]: >> The PCL-060 System On Module is a connector-less, BGA style variant of the >> PCM-060/phyCORE-AM335x R2 SOM. Unlike traditional Phytec SOM products that >> support >> high density connectors, the PCL-060 SOM is directly soldered down to the >> phyBOARD-Wega AM335x using Phytec's Direct Solder Connect technology (DSC). >> This >> solution offers an ultra-low cost Single Board Computer for the AM335x >> processor, while >> maintaining most of the advantages of the SOM concept. >> >> [1] >> https://www.phytec.de/fileadmin/user_upload/downloads/Manuals/L-845e_1.pdf > > Ah damn, this looks like a consistency problem is coming up. We have > multiple PCM* SoMs in U-Boot, one PCL* SoM and now another PCL/PCM SoM. > But the PCL063 isn't even manufactured in variant with connectors, so I > guess we can ignore that one. > > I wonder whether we should stick to PCM* for all of the Phytec SoMs for > consistency sake and document that PCL060 is also supported or maybe > there's a better way ?
Does PCX/PCx makes sense? But we have the same problem with variscite [1] SoM's (either SODIMM or solderable). [1] https://lists.denx.de/pipermail/u-boot/2019-April/365667.html > > [...] > -- Thanks, Parthiban N DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-22 Fax: (+49)-8142-66989-80 Email: [email protected] _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
