Document the main U-Boot image offset when booting from SATA disk on the Clearfog board.
Signed-off-by: Baruch Siach <[email protected]> --- board/solidrun/clearfog/README | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/board/solidrun/clearfog/README b/board/solidrun/clearfog/README index 0b0e98de90a0..6171ce66f4f8 100644 --- a/board/solidrun/clearfog/README +++ b/board/solidrun/clearfog/README @@ -40,6 +40,12 @@ Install U-Boot on eMMC boot partition from Linux running on Clearfog: Note that the SD card is not accessible when the Clearfog SOM has eMMC. Consider initial boot from UART (see below). +Install U-Boot on SATA: +----------------------- + +When loading the main U-Boot image from raw SATA sector, set +CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR to 0x141. + Boot selection: --------------- -- 2.20.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
