> -----Original Message----- > From: Prabhakar Kushwaha > Sent: 2019年5月22日 20:33 > To: Z.q. Hou <[email protected]>; [email protected]; > [email protected]; Priyanka Jain <[email protected]>; York Sun > <[email protected]>; [email protected]; > [email protected]; Mingkai Hu <[email protected]>; M.h. > Lian <[email protected]>; [email protected] > Subject: RE: [PATCHv5 0/8] pci: Add PCIe Gen4 controller driver for NXP > Layerscape SoCs > > > > -----Original Message----- > > From: Z.q. Hou > > Sent: Monday, April 8, 2019 3:45 PM > > To: [email protected]; [email protected]; Priyanka Jain > > <[email protected]>; York Sun <[email protected]>; > > [email protected]; [email protected]; Prabhakar > Kushwaha > > <[email protected]>; Mingkai Hu <[email protected]>; > M.h. > > Lian <[email protected]>; [email protected] > > Cc: Z.q. Hou <[email protected]> > > Subject: [PATCHv5 0/8] pci: Add PCIe Gen4 controller driver for NXP > > Layerscape SoCs > > > > From: Hou Zhiqiang <[email protected]> > > > > Add PCIe Gen4 driver for the NXP Layerscape series SoCs. > > Splited the patches of adding MRRS and MPS accessors from this thread. > > > > Hou Zhiqiang (8): > > armv8: layerscape: use PCIe address macro to precompile PCIe MMU > entry > > armv8: fsl-layerscpae: correct the PCIe controllers' region size > > armv8: lx2160a: add MMU table entries for PCIe > > pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs > > kconfig: add dependency PCIE_LAYERSCAPE_GEN4 for > FSL_PCIE_COMPAT > > pci: ls_pcie_g4: add device tree fixups for PCI Stream IDs > > armv8: lx2160a: add PCIe controller DT nodes > > armv8: lx2160a: enable PCIe support > > > > arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 2 +- > > arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 16 +- > > arch/arm/dts/fsl-lx2160a.dtsi | 85 +++ > > .../arm/include/asm/arch-fsl-layerscape/cpu.h | 9 + > > .../asm/arch-fsl-layerscape/immap_lsch3.h | 14 +- > > configs/lx2160aqds_tfa_SECURE_BOOT_defconfig | 5 + > > configs/lx2160aqds_tfa_defconfig | 6 + > > configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 7 +- > > configs/lx2160ardb_tfa_defconfig | 6 + > > drivers/pci/Kconfig | 8 + > > drivers/pci/Makefile | 2 + > > drivers/pci/pcie_layerscape_gen4.c | 572 > ++++++++++++++++++ > > drivers/pci/pcie_layerscape_gen4.h | 264 ++++++++ > > drivers/pci/pcie_layerscape_gen4_fixup.c | 249 ++++++++ > > 14 files changed, 1241 insertions(+), 4 deletions(-) create mode > > 100644 drivers/pci/pcie_layerscape_gen4.c > > create mode 100644 drivers/pci/pcie_layerscape_gen4.h > > create mode 100644 drivers/pci/pcie_layerscape_gen4_fixup.c > > use PCIe address macro for precompile PCIe MMU entry --> modified patch > put all CONFIG_SYS_PCIE4_PHYS_ADDR reference to #ifdef > CONFIG_SYS_PCIE4_PHYS_ADDR. > > This patch-series has been applied to fsl-qoriq master, awaiting upstream
Prabhakar, thanks a lot! - Zhiqiang > > --pk _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
