Hi prabhakar, >-----Original Message----- >From: Prabhakar Kushwaha >Sent: 2019年5月22日 20:33 >To: Peng Ma <peng...@nxp.com>; albert.u.b...@aribaud.net; >s...@chromium.org; Fabio Estevam <fabio.este...@nxp.com>; York Sun ><york....@nxp.com> >Cc: Andy Tang <andy.t...@nxp.com>; Yinbo Zhu <yinbo....@nxp.com>; >michal.si...@xilinx.com; u-boot@lists.denx.de; Peng Ma ><peng...@nxp.com> >Subject: RE: [v2 1/2] ARM: dts: Freescale: Add ecc addr for sata node > > >> -----Original Message----- >> From: Peng Ma <peng...@nxp.com> >> Sent: Wednesday, April 17, 2019 1:19 PM >> To: albert.u.b...@aribaud.net; s...@chromium.org; Fabio Estevam >> <fabio.este...@nxp.com>; York Sun <york....@nxp.com>; Prabhakar >> Kushwaha <prabhakar.kushw...@nxp.com> >> Cc: Andy Tang <andy.t...@nxp.com>; Yinbo Zhu <yinbo....@nxp.com>; >> michal.si...@xilinx.com; u-boot@lists.denx.de; Peng Ma >> <peng...@nxp.com> >> Subject: [v2 1/2] ARM: dts: Freescale: Add ecc addr for sata node >> >> Move the ecc addr from driver to dts. >> >> Signed-off-by: Peng Ma <peng...@nxp.com> >> --- >> changed for v2: >> - Add reg-names to improve driver code. >> > >fix chechpatch warning i.e. updated subject and applied to fsl-qoriq master, >awaiting upstream > >Can you send patches for ls2088a and ls1028a also [Peng Ma] ls2088a is not need to ecc address, I will add ls1028 patch to upstream.
Best Regards, Peng > >--pk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
