Add bootcmd for IFC NOR boot and SD boot.
Signed-off-by: Wasim Khan <wasim.k...@nxp.com>
---
include/configs/ls2080aqds.h | 45 ++++++++++++++++++++++++++++++++++++++------
1 file changed, 39 insertions(+), 6 deletions(-)
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 74c7dc4..85f12d4 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright 2017 NXP
+ * Copyright 2018-2019 NXP
* Copyright 2015 Freescale Semiconductor
*/
@@ -378,8 +378,8 @@ unsigned long get_board_ddr_clk(void);
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x80100000\0" \
"loadaddr_sd=0x90100000\0" \
- "kernel_addr=0x100000\0" \
- "kernel_addr_sd=0x800\0" \
+ "kernel_addr=0x581000000\0" \
+ "kernel_addr_sd=0x8000\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
"fdt_high=0xa0000000\0" \
@@ -389,9 +389,23 @@ unsigned long get_board_ddr_clk(void);
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
"kernel_size_sd=0x14000\0" \
- "mcinitcmd=fsl_mc start mc 0x580a00000" \
- " 0x580e00000 \0" \
- "mcmemsize=0x70000000 \0"
+ "load_addr=0xa0000000\0" \
+ "kernelheader_addr=0x580800000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernelheader_size=0x40000\0" \
+ "BOARD=ls2088aqds\0" \
+ "mcmemsize=0x70000000 \0" \
+ IFC_MC_INIT_CMD \
+ "nor_bootcmd=echo Trying load from nor..;" \
+ "cp.b $kernel_addr $load_addr " \
+ "$kernel_size ; env exists secureboot && " \
+ "cp.b $kernelheader_addr $kernelheader_addr_r " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ "bootm $load_addr#$BOARD\0" \
+ "sd_bootcmd=echo Trying load from SD ..;" \
+ "mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
+ "bootm $load_addr#$BOARD\0"
#elif defined(CONFIG_SD_BOOT)
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
@@ -426,6 +440,25 @@ unsigned long get_board_ddr_clk(void);
#endif /* CONFIG_TFABOOT */
#endif /* CONFIG_SECURE_BOOT */
+#ifdef CONFIG_TFABOOT
+#define SD_BOOTCOMMAND \
+ "env exists mcinitcmd && env exists secureboot "\
+ "&& mmcinfo && mmc read $load_addr 0x3c00 0x800 " \
+ "&& esbc_validate $load_addr; " \
+ "env exists mcinitcmd && run mcinitcmd " \
+ "&& mmc read 0x88000000 0x6800 0x800 " \
+ "&& fsl_mc lazyapply dpl 0x88000000; " \
+ "run sd_bootcmd; " \
+ "env exists secureboot && esbc_halt;"
+
+#define IFC_NOR_BOOTCOMMAND \
+ "env exists mcinitcmd && env exists secureboot "\
+ "&& esbc_validate 0x580780000; env exists mcinitcmd "\
+ "&& fsl_mc lazyapply dpl 0x580d00000;" \
+ "run nor_bootcmd; " \
+ "env exists secureboot && esbc_halt;"
+#endif
+
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
#define CONFIG_FSL_MEMAC
#define CONFIG_PHYLIB_10G
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
