Starting with rev 4.5, the eMMC can define a generic timeout for the SWITCH command.
Signed-off-by: Jean-Jacques Hiblot <[email protected]> --- Changes in v2: None drivers/mmc/mmc.c | 10 +++++++++- include/mmc.h | 2 ++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index a61e311cca..ff56c3dd67 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -21,6 +21,8 @@ #include <div64.h> #include "mmc_private.h" +#define DEFAULT_CMD6_TIMEOUT_MS 500 + static int mmc_set_signal_voltage(struct mmc *mmc, uint signal_voltage); static int mmc_power_cycle(struct mmc *mmc); #if !CONFIG_IS_ENABLED(MMC_TINY) @@ -745,10 +747,13 @@ static int __mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value, bool send_status) { struct mmc_cmd cmd; - int timeout = 1000; + int timeout = DEFAULT_CMD6_TIMEOUT_MS; int retries = 3; int ret; + if (mmc->gen_cmd6_time) + timeout = mmc->gen_cmd6_time * 10; + cmd.cmdidx = MMC_CMD_SWITCH; cmd.resp_type = MMC_RSP_R1b; cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | @@ -2135,6 +2140,9 @@ static int mmc_startup_v4(struct mmc *mmc) mmc->capacity_user = capacity; } + if (mmc->version >= MMC_VERSION_4_5) + mmc->gen_cmd6_time = ext_csd[EXT_CSD_GENERIC_CMD6_TIME]; + /* The partition data may be non-zero but it is only * effective if PARTITION_SETTING_COMPLETED is set in * EXT_CSD, so ignore any data if this bit is not set, diff --git a/include/mmc.h b/include/mmc.h index 854778deed..8159ef1448 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -226,6 +226,7 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx) #define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */ #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ #define EXT_CSD_BOOT_MULT 226 /* RO */ +#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ #define EXT_CSD_BKOPS_SUPPORT 502 /* RO */ /* @@ -581,6 +582,7 @@ struct mmc { u8 part_attr; u8 wr_rel_set; u8 part_config; + u8 gen_cmd6_time; uint tran_speed; uint legacy_speed; /* speed for the legacy mode provided by the card */ uint read_bl_len; -- 2.17.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
