Hi Jean,

> -----Original Message-----
> From: Jean-Jacques Hiblot [mailto:[email protected]]
> Sent: 2019年7月2日 16:54
> To: [email protected]
> Cc: Jean-Jacques Hiblot <[email protected]>; Jon Nettleton
> <[email protected]>; Peng Fan <[email protected]>; Marek Vasut
> <[email protected]>; [email protected]; Baruch Siach
> <[email protected]>; Jens Wiklander <[email protected]>; Rajesh
> Bhagat <[email protected]>
> Subject: [PATCH v2 07/11] mmc: use the generic timeout for cmd6 (SWITCH)
> provided in the ext_csd
> 
> Starting with rev 4.5, the eMMC can define a generic timeout for the SWITCH
> command.
> 
> Signed-off-by: Jean-Jacques Hiblot <[email protected]>
> ---
> 
> Changes in v2: None
> 
>  drivers/mmc/mmc.c | 10 +++++++++-
>  include/mmc.h     |  2 ++
>  2 files changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index
> a61e311cca..ff56c3dd67 100644
> --- a/drivers/mmc/mmc.c
> +++ b/drivers/mmc/mmc.c
> @@ -21,6 +21,8 @@
>  #include <div64.h>
>  #include "mmc_private.h"
> 
> +#define DEFAULT_CMD6_TIMEOUT_MS  500
> +
>  static int mmc_set_signal_voltage(struct mmc *mmc, uint signal_voltage);
> static int mmc_power_cycle(struct mmc *mmc);
> #if !CONFIG_IS_ENABLED(MMC_TINY) @@ -745,10 +747,13 @@ static int
> __mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value,
>                       bool send_status)
>  {
>       struct mmc_cmd cmd;
> -     int timeout = 1000;
> +     int timeout = DEFAULT_CMD6_TIMEOUT_MS;

Is this expected to change 1000->500?

Regards,
Peng.

>       int retries = 3;
>       int ret;
> 
> +     if (mmc->gen_cmd6_time)
> +             timeout = mmc->gen_cmd6_time * 10;
> +
>       cmd.cmdidx = MMC_CMD_SWITCH;
>       cmd.resp_type = MMC_RSP_R1b;
>       cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | @@
> -2135,6 +2140,9 @@ static int mmc_startup_v4(struct mmc *mmc)
>                       mmc->capacity_user = capacity;
>       }
> 
> +     if (mmc->version >= MMC_VERSION_4_5)
> +             mmc->gen_cmd6_time =
> ext_csd[EXT_CSD_GENERIC_CMD6_TIME];
> +
>       /* The partition data may be non-zero but it is only
>        * effective if PARTITION_SETTING_COMPLETED is set in
>        * EXT_CSD, so ignore any data if this bit is not set, diff --git
> a/include/mmc.h b/include/mmc.h index 854778deed..8159ef1448 100644
> --- a/include/mmc.h
> +++ b/include/mmc.h
> @@ -226,6 +226,7 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx)
>  #define EXT_CSD_HC_WP_GRP_SIZE               221     /* RO */
>  #define EXT_CSD_HC_ERASE_GRP_SIZE    224     /* RO */
>  #define EXT_CSD_BOOT_MULT            226     /* RO */
> +#define EXT_CSD_GENERIC_CMD6_TIME       248     /* RO */
>  #define EXT_CSD_BKOPS_SUPPORT                502     /* RO */
> 
>  /*
> @@ -581,6 +582,7 @@ struct mmc {
>       u8 part_attr;
>       u8 wr_rel_set;
>       u8 part_config;
> +     u8 gen_cmd6_time;
>       uint tran_speed;
>       uint legacy_speed; /* speed for the legacy mode provided by the card */
>       uint read_bl_len;
> --
> 2.17.1

_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot

Reply via email to