From: Igor Opaniuk <[email protected]>
Add u-boot,dm-pre-reloc property for uart pinmux configuration
nodes, which enables UART as early as possible (before relocation).
Without this we miss almost the half of output (U-boot version,
CPU defails, Reset cause, DRAM details etc.).
Fixes: cd69e8ef9b ("colibri-imx6ull: migrate pinctrl and regulators to dtb/dm")
Signed-off-by: Igor Opaniuk <[email protected]>
---
arch/arm/dts/imx6ull-colibri.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/dts/imx6ull-colibri.dts b/arch/arm/dts/imx6ull-colibri.dts
index 6c847ab792..8cc67a1fa7 100644
--- a/arch/arm/dts/imx6ull-colibri.dts
+++ b/arch/arm/dts/imx6ull-colibri.dts
@@ -458,6 +458,7 @@
};
pinctrl_uart1: uart1-grp {
+ u-boot,dm-pre-reloc;
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1
MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1
@@ -467,6 +468,7 @@
};
pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */
+ u-boot,dm-pre-reloc;
fsl,pins = <
MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x1b0b1 /* DCD
*/
MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x1b0b1 /* DSR
*/
--
2.17.1
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
