The board_early_init_f() is only used by veyron board now, move it into the board file veyron.c
Signed-off-by: Kever Yang <[email protected]> --- arch/arm/mach-rockchip/rk3288-board.c | 19 ------------------- board/google/veyron/veyron.c | 20 ++++++++++++++++++++ 2 files changed, 20 insertions(+), 19 deletions(-) diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c index 9d88365fff..e629df3abb 100644 --- a/arch/arm/mach-rockchip/rk3288-board.c +++ b/arch/arm/mach-rockchip/rk3288-board.c @@ -243,22 +243,3 @@ U_BOOT_CMD( "display information about clocks", "" ); - -int board_early_init_f(void) -{ - struct udevice *dev; - int ret; - - /* - * This init is done in SPL, but when chain-loading U-Boot SPL will - * have been skipped. Allow the clock driver to check if it needs - * setting up. - */ - ret = rockchip_get_clk(&dev); - if (ret) { - debug("CLK init failed: %d\n", ret); - return ret; - } - - return 0; -} diff --git a/board/google/veyron/veyron.c b/board/google/veyron/veyron.c index 19edb18a66..361f0e9da2 100644 --- a/board/google/veyron/veyron.c +++ b/board/google/veyron/veyron.c @@ -4,9 +4,29 @@ */ #include <common.h> +#include <asm/arch-rockchip/clock.h> /* * We should increase the DDR voltage to 1.2V using the PWM regulator. * There is a U-Boot driver for this but it may need to add support for the * 'voltage-table' property. */ + +int board_early_init_f(void) +{ + struct udevice *dev; + int ret; + + /* + * This init is done in SPL, but when chain-loading U-Boot SPL will + * have been skipped. Allow the clock driver to check if it needs + * setting up. + */ + ret = rockchip_get_clk(&dev); + if (ret) { + debug("CLK init failed: %d\n", ret); + return ret; + } + + return 0; +} -- 2.17.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
