> From: Neil Armstrong <[email protected]> > Date: Wed, 31 Jul 2019 09:18:10 +0200 > > On 29/07/2019 15:45, Neil Armstrong wrote: > > ODROID-N2 is a single board computer manufactured by Hardkernel Co. Ltd > > with the following specifications: > > > > - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC > > - 4GB DDR4 SDRAM > > - Gigabit Ethernet > > - HDMI 2.1 4K/60Hz display > > - 40-pin GPIO header > > - 4 x USB 3.0 Host, 1 x USB OTG > > - eMMC, microSD > > - Infrared receiver > > > > This patchset : > > - adds the Odroid-N2 from Linux 5.3-rc1 > > - fixes 4GiB memory support > > - adds board support > > > > The board directory is W400, the name of the Amlogic Reference Design > > of Amlogic G12B with Gigabit boards, which will be used for similar > > boards. > > > > Changes since v1: > > - Fix typo in README.odroid-n2 > > > > Neil Armstrong (3): > > ARM: dts: add support for Odroid-N2 > > ARM: meson-g12a: Handle 4GiB DRAM size > > board: amlogic: add support for Odroid-N2 > > > > arch/arm/dts/Makefile | 3 +- > > arch/arm/dts/meson-g12b-odroid-n2.dts | 386 ++++++++++++++++++ > > arch/arm/dts/meson-g12b.dtsi | 82 ++++ > > arch/arm/mach-meson/board-g12a.c | 13 +- > > board/amlogic/w400/MAINTAINERS | 6 + > > board/amlogic/w400/Makefile | 6 + > > board/amlogic/w400/README.odroid-n2 | 130 ++++++ > > board/amlogic/w400/README.w400 | 130 ++++++ > > board/amlogic/w400/w400.c | 18 + > > configs/odroid-n2_defconfig | 56 +++ > > .../dt-bindings/sound/meson-g12a-tohdmitx.h | 13 + > > 11 files changed, 836 insertions(+), 7 deletions(-) > > create mode 100644 arch/arm/dts/meson-g12b-odroid-n2.dts > > create mode 100644 arch/arm/dts/meson-g12b.dtsi > > create mode 100644 board/amlogic/w400/MAINTAINERS > > create mode 100644 board/amlogic/w400/Makefile > > create mode 100644 board/amlogic/w400/README.odroid-n2 > > create mode 100644 board/amlogic/w400/README.w400 > > create mode 100644 board/amlogic/w400/w400.c > > create mode 100644 configs/odroid-n2_defconfig > > create mode 100644 include/dt-bindings/sound/meson-g12a-tohdmitx.h > > > > Applied on u-boot-amlogic
FWIW, this made it possible for me to finally build a U-Boot with UEFI support that can run the OpenBSD bootloader and kernel. Now I just need to finish writing the device drivers for the Amlogic-specific hardware blocks ;). So, feel free to add: Tested-by: Mark Kettenis <[email protected]> if for some reason you need to respin the series _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
