Hi, On 31/07/2019 11:30, Mark Kettenis wrote: >> From: Neil Armstrong <[email protected]> >> Date: Wed, 31 Jul 2019 09:18:10 +0200 >> >> On 29/07/2019 15:45, Neil Armstrong wrote: >>> ODROID-N2 is a single board computer manufactured by Hardkernel Co. Ltd >>> with the following specifications: >>> >>> - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC >>> - 4GB DDR4 SDRAM >>> - Gigabit Ethernet >>> - HDMI 2.1 4K/60Hz display >>> - 40-pin GPIO header >>> - 4 x USB 3.0 Host, 1 x USB OTG >>> - eMMC, microSD >>> - Infrared receiver >>> >>> This patchset : >>> - adds the Odroid-N2 from Linux 5.3-rc1 >>> - fixes 4GiB memory support >>> - adds board support >>> >>> The board directory is W400, the name of the Amlogic Reference Design >>> of Amlogic G12B with Gigabit boards, which will be used for similar >>> boards. >>> >>> Changes since v1: >>> - Fix typo in README.odroid-n2 >>> >>> Neil Armstrong (3): >>> ARM: dts: add support for Odroid-N2 >>> ARM: meson-g12a: Handle 4GiB DRAM size >>> board: amlogic: add support for Odroid-N2 >>> >>> arch/arm/dts/Makefile | 3 +- >>> arch/arm/dts/meson-g12b-odroid-n2.dts | 386 ++++++++++++++++++ >>> arch/arm/dts/meson-g12b.dtsi | 82 ++++ >>> arch/arm/mach-meson/board-g12a.c | 13 +- >>> board/amlogic/w400/MAINTAINERS | 6 + >>> board/amlogic/w400/Makefile | 6 + >>> board/amlogic/w400/README.odroid-n2 | 130 ++++++ >>> board/amlogic/w400/README.w400 | 130 ++++++ >>> board/amlogic/w400/w400.c | 18 + >>> configs/odroid-n2_defconfig | 56 +++ >>> .../dt-bindings/sound/meson-g12a-tohdmitx.h | 13 + >>> 11 files changed, 836 insertions(+), 7 deletions(-) >>> create mode 100644 arch/arm/dts/meson-g12b-odroid-n2.dts >>> create mode 100644 arch/arm/dts/meson-g12b.dtsi >>> create mode 100644 board/amlogic/w400/MAINTAINERS >>> create mode 100644 board/amlogic/w400/Makefile >>> create mode 100644 board/amlogic/w400/README.odroid-n2 >>> create mode 100644 board/amlogic/w400/README.w400 >>> create mode 100644 board/amlogic/w400/w400.c >>> create mode 100644 configs/odroid-n2_defconfig >>> create mode 100644 include/dt-bindings/sound/meson-g12a-tohdmitx.h >>> >> >> Applied on u-boot-amlogic > > FWIW, this made it possible for me to finally build a U-Boot with UEFI > support that can run the OpenBSD bootloader and kernel. Now I just > need to finish writing the device drivers for the Amlogic-specific > hardware blocks ;). > > So, feel free to add: > > Tested-by: Mark Kettenis <[email protected]> > > if for some reason you need to respin the series >
Nice, I haven't sent the PR, so I'll add it ! Thanks for testing ! Neil _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
