Re: [U-Boot] [PATCH] net: zynq_gem: Remove check for Versal

[Michal Simek]

st 11. 9. 2019 v 10:42 odesílatel Michal Simek <michal.si...@xilinx.com> napsal:
>
> From: Siva Durga Prasad Paladugu <siva...@xilinx.com>
>
> This patch removes check for Versal platform
> in gem driver as it now supports clock setting
> through clock framework.
>
> Signed-off-by: Siva Durga Prasad Paladugu <siva...@xilinx.com>
> Signed-off-by: Michal Simek <michal.si...@xilinx.com>
> ---
>
> This patch depends on 
> https://lists.denx.de/pipermail/u-boot/2019-September/383239.html
>
> Joe: I would take this together with versal clock driver when reviewed.
> ---
>  drivers/net/zynq_gem.c | 4 ----
>  1 file changed, 4 deletions(-)
>
> diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
> index a35ecab79ee9..a7a6ce987f07 100644
> --- a/drivers/net/zynq_gem.c
> +++ b/drivers/net/zynq_gem.c
> @@ -463,7 +463,6 @@ static int zynq_gem_init(struct udevice *dev)
>                 break;
>         }
>
> -#if !defined(CONFIG_ARCH_VERSAL)
>         ret = clk_set_rate(&priv->clk, clk_rate);
>         if (IS_ERR_VALUE(ret) && ret != (unsigned long)-ENOSYS) {
>                 dev_err(dev, "failed to set tx clock rate\n");
> @@ -475,9 +474,6 @@ static int zynq_gem_init(struct udevice *dev)
>                 dev_err(dev, "failed to enable tx clock\n");
>                 return ret;
>         }
> -#else
> -       debug("requested clk_rate %ld\n", clk_rate);
> -#endif
>
>         setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
>                                         ZYNQ_GEM_NWCTRL_TXEN_MASK);
> --
> 2.17.1
>

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot