This series cleans up the Atheros PHY AR803x PHY driver and adds a
device tree binding for the most commonly used PHY settings like clock
output.
If you're a board maintainer you're getting this mail because you probably
use an AR803x PHY on your board. Please have a look at your board specific
code and see if you can use the device tree bindings instead. Let me know,
if something is missing.
Michael Walle (9):
phy: atheros: introduce debug read and write functions
phy: atheros: move delay config to common function
phy: atheros: ar8035: remove extra delay config
phy: atheros: ar8035: use phy_{read|write}_mmd()
phy: atheros: don't overwrite debug register values
phy: atheros: fix delay configuration
phy: atheros: Add device tree bindings and config
phy: atheros: ar8035: remove static clock config
phy: atheros: consolidate {ar8031|ar8035}_config()
doc/device-tree-bindings/net/phy/atheros.txt | 22 ++
drivers/net/phy/atheros.c | 262 +++++++++++++++----
2 files changed, 240 insertions(+), 44 deletions(-)
create mode 100644 doc/device-tree-bindings/net/phy/atheros.txt
Cc: Joe Hershberger <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Adam Ford <[email protected]>
Cc: Otavio Salvador <[email protected]>
Cc: Ian Ray <[email protected]>
Cc: Jason Liu <[email protected]>
Cc: Ye Li <[email protected]>
Cc: Uri Mashiach <[email protected]>
Cc: Nikita Kiryanov <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Vanessa Maegima <[email protected]>
Cc: Eric Bénard <[email protected]>
--
2.20.1
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
